# CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License, Version 1.0 only # (the "License"). You may not use this file except in compliance # with the License. # # You can obtain a copy of the license at # trunk/opends/resource/legal-notices/OpenDS.LICENSE # or https://OpenDS.dev.java.net/OpenDS.LICENSE. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at # trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable, # add the following below this CDDL HEADER, with the fields enclosed # by brackets "[]" replaced with your own identifying information: # Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # Copyright 2006-2009 Sun Microsystems, Inc. # # Global directives # global.category=UTIL global.use.message.jar.if.webstart=true # # Format string definitions # # Keys must be formatted as follows: # # [SEVERITY]_[DESCRIPTION]_[ORDINAL] # # where: # # SEVERITY is one of: # [INFO, MILD_WARN, SEVERE_WARN, MILD_ERR, SEVERE_ERR, FATAL_ERR, DEBUG, NOTICE] # # DESCRIPTION is an upper case string providing a hint as to the context of # the message in upper case with the underscore ('_') character serving as # word separator # # ORDINAL is an integer unique among other ordinals in this file # MILD_ERR_BASE64_DECODE_INVALID_LENGTH_1=The value %s cannot be base64-decoded \ because it does not have a length that is a multiple of four bytes MILD_ERR_BASE64_DECODE_INVALID_CHARACTER_2=The value %s cannot be \ base64-decoded because it contains an illegal character %c that is not \ allowed in base64-encoded values MILD_ERR_HEX_DECODE_INVALID_LENGTH_3=The value %s cannot be decoded as a \ hexadecimal string because it does not have a length that is a multiple of \ two bytes MILD_ERR_HEX_DECODE_INVALID_CHARACTER_4=The value %s cannot be decoded as a \ hexadecimal string because it contains an illegal character %c that is not a \ valid hexadecimal digit MILD_ERR_LDIF_INVALID_LEADING_SPACE_5=Unable to parse line %d ("%s") from the \ LDIF source because the line started with a space but there were no previous \ lines in the entry to which this line could be appended MILD_ERR_LDIF_NO_ATTR_NAME_6=Unable to parse LDIF entry starting at line %d \ because the line "%s" does not include an attribute name MILD_ERR_LDIF_NO_DN_7=Unable to parse LDIF entry starting at line %d because \ the first line does not contain a DN (the first line was "%s" MILD_ERR_LDIF_INVALID_DN_SEPARATOR_8=Unable to parse LDIF entry starting at \ line %d because line "%s" contained an invalid separator between the "dn" \ prefix and the actual distinguished name MILD_ERR_LDIF_INVALID_DN_9=Unable to parse LDIF entry starting at line %d \ because an error occurred while trying to parse the value of line "%s" as a \ distinguished name: %s MILD_ERR_LDIF_INVALID_ATTR_SEPARATOR_10=Unable to parse LDIF entry %s \ starting at line %d because line "%s" contained an invalid separator between \ the attribute name and value MILD_ERR_LDIF_COULD_NOT_BASE64_DECODE_DN_11=Unable to parse LDIF entry \ starting at line %d because it was not possible to base64-decode the DN on \ line "%s": %s MILD_ERR_LDIF_COULD_NOT_BASE64_DECODE_ATTR_12=Unable to parse LDIF entry %s \ starting at line %d because it was not possible to base64-decode the \ attribute on line "%s": %s MILD_WARN_LDIF_DUPLICATE_OBJECTCLASS_13=Entry %s read from LDIF starting at \ line %d includes a duplicate objectclass value %s. The second occurrence of \ that objectclass has been skipped MILD_WARN_LDIF_DUPLICATE_ATTR_14=Entry %s read from LDIF starting at line %d \ includes a duplicate attribute %s with value %s. The second occurrence of \ that attribute value has been skipped MILD_ERR_LDIF_MULTIPLE_VALUES_FOR_SINGLE_VALUED_ATTR_15=Entry %s starting at \ line %d includes multiple values for single-valued attribute %s MILD_ERR_LDIF_INVALID_ATTR_SYNTAX_16=Unable to parse LDIF entry %s starting \ at line %d because it has an invalid value "%s" for attribute %s: %s MILD_ERR_LDIF_SCHEMA_VIOLATION_17=Entry %s read from LDIF starting at line %d \ is not valid because it violates the server's schema configuration: %s SEVERE_ERR_LDIF_FILE_EXISTS_18=The specified LDIF file %s already exists and \ the export configuration indicates that no attempt should be made to append \ to or replace the file MILD_ERR_LDIF_INVALID_URL_19=Unable to parse LDIF entry %s starting at line \ %d because the value of attribute %s was to be read from a URL but the URL \ was invalid: %s MILD_ERR_LDIF_URL_IO_ERROR_20=Unable to parse LDIF entry %s starting at line \ %d because the value of attribute %s was to be read from URL %s but an error \ occurred while trying to read that content: %s SEVERE_ERR_REJECT_FILE_EXISTS_21=The specified reject file %s already exists \ and the import configuration indicates that no attempt should be made to \ append to or replace the file SEVERE_ERR_LDIF_COULD_NOT_EVALUATE_FILTERS_FOR_IMPORT_22=An error occurred \ while attempting to determine whether LDIF entry "%s" starting at line %d \ should be imported as a result of the include and exclude filter \ configuration: %s SEVERE_ERR_LDIF_COULD_NOT_EVALUATE_FILTERS_FOR_EXPORT_23=An error occurred \ while attempting to determine whether LDIF entry "%s" should be exported as a \ result of the include and exclude filter configuration: %s SEVERE_ERR_LDIF_INVALID_DELETE_ATTRIBUTES_24=Error in the LDIF change record \ entry. Invalid attributes specified for the delete operation SEVERE_ERR_LDIF_NO_MOD_DN_ATTRIBUTES_25=Error in the LDIF change record \ entry. No attributes specified for the mod DN operation SEVERE_ERR_LDIF_NO_DELETE_OLDRDN_ATTRIBUTE_26=Error in the LDIF change record \ entry. No delete old RDN attribute specified for the mod DN operation SEVERE_ERR_LDIF_INVALID_DELETE_OLDRDN_ATTRIBUTE_27=Error in the LDIF change \ record entry. Invalid value "%s" for the delete old RDN attribute specified \ for the mod DN operation SEVERE_ERR_LDIF_INVALID_CHANGERECORD_ATTRIBUTE_28=Error in the LDIF change \ record entry. Invalid attribute "%s" specified. Expecting attribute "%s" SEVERE_ERR_LDIF_INVALID_MODIFY_ATTRIBUTE_29=Error in the LDIF change record \ entry. Invalid attribute "%s" specified. Expecting one of the following \ attributes "%s" SEVERE_ERR_LDIF_INVALID_CHANGETYPE_ATTRIBUTE_30=Error in the LDIF change \ record entry. Invalid value "%s" for the changetype specified. Expecting one \ of the following values "%s" SEVERE_ERR_LDIF_INVALID_MODIFY_ATTRIBUTE_VAL_31=Error in the LDIF change \ record entry. Invalid value for the "%s" attribute specified SEVERE_ERR_SCHEMANAME_EMPTY_VALUE_32=The provided value could not be parsed \ to determine whether it contained a valid schema element name or OID because \ it was null or empty SEVERE_ERR_SCHEMANAME_ILLEGAL_CHAR_33=The provided value "%s" does not \ contain a valid schema element name or OID because it contains an illegal \ character %c at position %d SEVERE_ERR_SCHEMANAME_CONSECUTIVE_PERIODS_34=The provided value "%s" does not \ contain a valid schema element name or OID because the numeric OID contains \ two consecutive periods at position %d SEVERE_ERR_ARG_NO_IDENTIFIER_35=The %s argument does not have either a \ single-character or a long identifier that may be used to specify it. At \ least one of these must be specified for each argument SEVERE_ERR_ARG_NO_VALUE_PLACEHOLDER_36=The %s argument is configured to take \ a value but no value placeholder has been defined for it SEVERE_ERR_ARG_NO_INT_VALUE_37=The %s argument does not have any value that \ may be retrieved as an integer SEVERE_ERR_ARG_CANNOT_DECODE_AS_INT_38=The provided value "%s" for the %s \ argument cannot be decoded as an integer SEVERE_ERR_ARG_INT_MULTIPLE_VALUES_39=The %s argument has multiple values and \ therefore cannot be decoded as a single integer value SEVERE_ERR_ARG_NO_BOOLEAN_VALUE_40=The %s argument does not have any value \ that may be retrieved as a Boolean SEVERE_ERR_ARG_CANNOT_DECODE_AS_BOOLEAN_41=The provided value "%s" for the %s \ argument cannot be decoded as a Boolean SEVERE_ERR_ARG_BOOLEAN_MULTIPLE_VALUES_42=The %s argument has multiple values \ and therefore cannot be decoded as a single Boolean value SEVERE_ERR_INTARG_LOWER_BOUND_ABOVE_UPPER_BOUND_43=The %s argument \ configuration is invalid because the lower bound of %d is greater than the \ upper bound of %d SEVERE_ERR_INTARG_VALUE_BELOW_LOWER_BOUND_44=The provided %s value %d is \ unacceptable because it is below the lower bound of %d SEVERE_ERR_INTARG_VALUE_ABOVE_UPPER_BOUND_45=The provided %s value %d is \ unacceptable because it is above the upper bound of %d SEVERE_ERR_BOOLEANARG_NO_VALUE_ALLOWED_46=The provided %s value is \ unacceptable because Boolean arguments are never allowed to have values SEVERE_ERR_MCARG_VALUE_NOT_ALLOWED_47=The provided %s value %s is \ unacceptable because it is not included in the set of allowed values for that \ argument SEVERE_ERR_FILEARG_NO_SUCH_FILE_48=The file %s specified for argument %s does \ not exist SEVERE_ERR_FILEARG_CANNOT_VERIFY_FILE_EXISTENCE_49=An error occurred while \ trying to verify the existence of file %s specified for argument %s: %s SEVERE_ERR_FILEARG_CANNOT_OPEN_FILE_50=An error occurred while trying to open \ file %s specified for argument %s for reading: %s SEVERE_ERR_FILEARG_CANNOT_READ_FILE_51=An error occurred while trying to read \ from file %s specified for argument %s: %s SEVERE_ERR_FILEARG_EMPTY_FILE_52=The file %s specified for argument %s exists \ but is empty SEVERE_ERR_ARGPARSER_DUPLICATE_SHORT_ID_53=Cannot add argument %s to the \ argument list because its short identifier -%s conflicts with the %s argument \ that has already been defined SEVERE_ERR_ARGPARSER_DUPLICATE_LONG_ID_54=Cannot add argument %s to the \ argument list because its long identifier --%s conflicts with the %s argument \ that has already been defined SEVERE_ERR_ARGPARSER_CANNOT_READ_PROPERTIES_FILE_55=An error occurred while \ attempting to read the contents of the argument properties file %s: %s SEVERE_ERR_ARGPARSER_TOO_MANY_TRAILING_ARGS_56=The provided set of \ command-line arguments contained too many unnamed trailing arguments. The \ maximum number of allowed trailing arguments is %d SEVERE_ERR_ARGPARSER_LONG_ARG_WITHOUT_NAME_57=The provided argument "%s" is \ invalid because it does not include the argument name SEVERE_ERR_ARGPARSER_NO_ARGUMENT_WITH_LONG_ID_58=Argument --%s is not allowed \ for use with this program SEVERE_ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID_59=Argument --%s \ requires a value but none was provided SEVERE_ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID_60=The provided value \ "%s" for argument --%s is not acceptable: %s SEVERE_ERR_ARGPARSER_NOT_MULTIVALUED_FOR_LONG_ID_61=The argument --%s was \ included multiple times in the provided set of arguments but it does not \ allow multiple values SEVERE_ERR_ARGPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE_62=A value was \ provided for argument --%s but that argument does not take a value SEVERE_ERR_ARGPARSER_INVALID_DASH_AS_ARGUMENT_63=The dash character by itself \ is invalid for use as an argument name SEVERE_ERR_ARGPARSER_NO_ARGUMENT_WITH_SHORT_ID_64=Argument -%s is not allowed \ for use with this program SEVERE_ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID_65=Argument -%s \ requires a value but none was provided SEVERE_ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID_66=The provided value \ "%s" for argument -%s is not acceptable: %s SEVERE_ERR_ARGPARSER_NOT_MULTIVALUED_FOR_SHORT_ID_67=The argument -%s was \ included multiple times in the provided set of arguments but it does not \ allow multiple values SEVERE_ERR_ARGPARSER_CANT_MIX_ARGS_WITH_VALUES_68=The provided argument block \ '-%s%s' is illegal because the '%s' argument requires a value but is in the \ same block as at least one other argument that doesn't require a value SEVERE_ERR_ARGPARSER_DISALLOWED_TRAILING_ARGUMENT_69=Argument "%s" does not \ start with one or two dashes and unnamed trailing arguments are not allowed SEVERE_ERR_ARGPARSER_TOO_FEW_TRAILING_ARGUMENTS_70=At least %d unnamed \ trailing arguments are required in the argument list, but too few were \ provided SEVERE_ERR_ARGPARSER_NO_VALUE_FOR_REQUIRED_ARG_71=The argument %s is required \ to have a value but none was provided in the argument list and no default \ value is available SEVERE_ERR_MOVEFILE_NO_SUCH_FILE_72=The file to move %s does not exist SEVERE_ERR_MOVEFILE_NOT_FILE_73=The file to move %s exists but is not a file SEVERE_ERR_MOVEFILE_NO_SUCH_DIRECTORY_74=The target directory %s does not \ exist SEVERE_ERR_MOVEFILE_NOT_DIRECTORY_75=The target directory %s exists but is \ not a directory SEVERE_ERR_EMAILMSG_INVALID_SENDER_ADDRESS_76=The provided sender address %s \ is invalid: %s SEVERE_ERR_EMAILMSG_INVALID_RECIPIENT_ADDRESS_77=The provided recipient \ address %s is invalid: %s SEVERE_ERR_EMAILMSG_CANNOT_SEND_78=The specified e-mail message could not be \ sent using any of the configured mail servers SEVERE_ERR_ARG_SUBCOMMAND_DUPLICATE_SUBCOMMAND_79=The argument parser already \ has a %s subcommand SEVERE_ERR_ARG_SUBCOMMAND_DUPLICATE_ARGUMENT_NAME_80=There are multiple \ arguments for subcommand %s with name %s SEVERE_ERR_ARG_SUBCOMMAND_ARGUMENT_GLOBAL_CONFLICT_81=Argument %s for \ subcommand %s conflicts with a global argument with the same name SEVERE_ERR_ARG_SUBCOMMAND_DUPLICATE_SHORT_ID_82=Argument %s for subcommand %s \ has a short identifier -%s that conflicts with that of argument %s SEVERE_ERR_ARG_SUBCOMMAND_ARGUMENT_SHORT_ID_GLOBAL_CONFLICT_83=Argument %s \ for subcommand %s has a short ID -%s that conflicts with that of global \ argument %s SEVERE_ERR_ARG_SUBCOMMAND_DUPLICATE_LONG_ID_84=Argument %s for subcommand %s \ has a long identifier --%s that conflicts with that of argument %s SEVERE_ERR_ARG_SUBCOMMAND_ARGUMENT_LONG_ID_GLOBAL_CONFLICT_85=Argument %s for \ subcommand %s has a long ID --%s that conflicts with that of global argument \ %s SEVERE_ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_NAME_86=There is already another \ global argument named "%s" SEVERE_ERR_SUBCMDPARSER_GLOBAL_ARG_NAME_SUBCMD_CONFLICT_87=The argument name \ %s conflicts with the name of another argument associated with the %s \ subcommand SEVERE_ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_SHORT_ID_88=Short ID -%s for \ global argument %s conflicts with the short ID of another global argument %s SEVERE_ERR_SUBCMDPARSER_GLOBAL_ARG_SHORT_ID_CONFLICT_89=Short ID -%s for \ global argument %s conflicts with the short ID for the %s argument associated \ with subcommand %s SEVERE_ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_LONG_ID_90=Long ID --%s for \ global argument %s conflicts with the long ID of another global argument %s SEVERE_ERR_SUBCMDPARSER_GLOBAL_ARG_LONG_ID_CONFLICT_91=Long ID --%s for \ global argument %s conflicts with the long ID for the %s argument associated \ with subcommand %s SEVERE_ERR_SUBCMDPARSER_CANNOT_READ_PROPERTIES_FILE_92=An error occurred \ while attempting to read the contents of the argument properties file %s: %s SEVERE_ERR_SUBCMDPARSER_LONG_ARG_WITHOUT_NAME_93=The provided command-line \ argument %s does not contain an argument name SEVERE_ERR_SUBCMDPARSER_NO_GLOBAL_ARGUMENT_FOR_LONG_ID_94=The provided \ argument --%s is not a valid global argument identifier SEVERE_ERR_SUBCMDPARSER_NO_ARGUMENT_FOR_LONG_ID_95=The provided argument --%s \ is not a valid global or subcommand argument identifier SEVERE_ERR_SUBCMDPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID_96=Command-line \ argument --%s requires a value but none was given SEVERE_ERR_SUBCMDPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID_97=The provided value \ "%s" for argument --%s is not acceptable: %s SEVERE_ERR_SUBCMDPARSER_NOT_MULTIVALUED_FOR_LONG_ID_98=The argument --%s was \ included multiple times in the provided set of arguments but it does not \ allow multiple values SEVERE_ERR_SUBCMDPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE_99=A value was \ provided for argument --%s but that argument does not take a value SEVERE_ERR_SUBCMDPARSER_INVALID_DASH_AS_ARGUMENT_100=The dash character by \ itself is invalid for use as an argument name SEVERE_ERR_SUBCMDPARSER_NO_GLOBAL_ARGUMENT_FOR_SHORT_ID_101=The provided \ argument -%s is not a valid global argument identifier SEVERE_ERR_SUBCMDPARSER_NO_ARGUMENT_FOR_SHORT_ID_102=The provided argument \ -%s is not a valid global or subcommand argument identifier SEVERE_ERR_SUBCMDPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID_103=Argument -%s \ requires a value but none was provided SEVERE_ERR_SUBCMDPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID_104=The provided \ value "%s" for argument -%s is not acceptable: %s SEVERE_ERR_SUBCMDPARSER_NOT_MULTIVALUED_FOR_SHORT_ID_105=The argument -%s was \ included multiple times in the provided set of arguments but it does not \ allow multiple values SEVERE_ERR_SUBCMDPARSER_CANT_MIX_ARGS_WITH_VALUES_106=The provided argument \ block '-%s%s' is illegal because the '%s' argument requires a value but is in \ the same block as at least one other argument that doesn't require a value SEVERE_ERR_SUBCMDPARSER_INVALID_ARGUMENT_107=The provided argument "%s" is \ not recognized SEVERE_ERR_SUBCMDPARSER_MULTIPLE_SUBCOMMANDS_108=The provided argument %s \ specifies a valid subcommand, but another subcommand %s was also given. Only \ a single subcommand may be provided SEVERE_ERR_SUBCMDPARSER_NO_VALUE_FOR_REQUIRED_ARG_109=The argument %s is \ required to have a value but none was provided in the argument list and no \ default value is available SEVERE_ERR_LDAPURL_NO_COLON_SLASH_SLASH_110=The provided string "%s" cannot \ be decoded as an LDAP URL because it does not contain the necessary :// \ component to separate the scheme from the rest of the URL SEVERE_ERR_LDAPURL_NO_SCHEME_111=The provided string "%s" cannot be decoded \ as an LDAP URL because it does not contain a protocol scheme SEVERE_ERR_LDAPURL_NO_HOST_112=The provided string "%s" cannot be decoded as \ an LDAP URL because it does not contain a host before the colon to specify \ the port number SEVERE_ERR_LDAPURL_NO_PORT_113=The provided string "%s" cannot be decoded as \ an LDAP URL because it does not contain a port number after the colon \ following the host SEVERE_ERR_LDAPURL_CANNOT_DECODE_PORT_114=The provided string "%s" cannot be \ decoded as an LDAP URL because the port number portion %s cannot be decoded \ as an integer SEVERE_ERR_LDAPURL_INVALID_PORT_115=The provided string "%s" cannot be \ decoded as an LDAP URL because the provided port number %d is not within the \ valid range between 1 and 65535 SEVERE_ERR_LDAPURL_INVALID_SCOPE_STRING_116=The provided string "%s" cannot \ be decoded as an LDAP URL because the scope string %s was not one of the \ allowed values of base, one, sub, or subordinate SEVERE_ERR_LDAPURL_PERCENT_TOO_CLOSE_TO_END_117=The provided URL component \ "%s" could not be decoded because the percent character at byte %d was not \ followed by two hexadecimal digits SEVERE_ERR_LDAPURL_INVALID_HEX_BYTE_118=The provided URL component "%s" could \ not be decoded because the character at byte %d was not a valid hexadecimal \ digit SEVERE_ERR_LDAPURL_CANNOT_CREATE_UTF8_STRING_119=An error occurred while \ attempting to represent a byte array as a UTF-8 string during the course of \ decoding a portion of an LDAP URL: %s MILD_ERR_CHARSET_NO_COLON_120=Cannot decode value "%s" as a named character \ set because it does not contain a colon to separate the name from the set of \ characters MILD_ERR_CHARSET_CONSTRUCTOR_NO_NAME_121=The named character set is invalid \ because it does not contain a name MILD_ERR_CHARSET_CONSTRUCTOR_INVALID_NAME_CHAR_122=The named character set is \ invalid because the provide name "%s" has an invalid character at position \ %d. Only ASCII alphabetic characters are allowed in the name MILD_ERR_CHARSET_NO_NAME_123=Cannot decode value "%s" as a named character \ set because it does not contain a name to use for the character set MILD_ERR_CHARSET_NO_CHARS_124=Cannot decode value "%s" as a named character \ set because there are no characters to include in the set INFO_TIME_IN_SECONDS_125=%d seconds INFO_TIME_IN_MINUTES_SECONDS_126=%d minutes, %d seconds INFO_TIME_IN_HOURS_MINUTES_SECONDS_127=%d hours, %d minutes, %d seconds INFO_TIME_IN_DAYS_HOURS_MINUTES_SECONDS_128=%d days, %d hours, %d minutes, %d \ seconds INFO_ACCTNOTTYPE_ACCOUNT_TEMPORARILY_LOCKED_129=account-temporarily-locked INFO_ACCTNOTTYPE_ACCOUNT_PERMANENTLY_LOCKED_130=account-permanently-locked INFO_ACCTNOTTYPE_ACCOUNT_UNLOCKED_131=account-unlocked INFO_ACCTNOTTYPE_ACCOUNT_IDLE_LOCKED_132=account-idle-locked INFO_ACCTNOTTYPE_ACCOUNT_RESET_LOCKED_133=account-reset-locked INFO_ACCTNOTTYPE_ACCOUNT_DISABLED_134=account-disabled INFO_ACCTNOTTYPE_ACCOUNT_ENABLED_135=account-enabled INFO_ACCTNOTTYPE_ACCOUNT_EXPIRED_136=account-expired INFO_ACCTNOTTYPE_PASSWORD_EXPIRED_137=password-expired INFO_ACCTNOTTYPE_PASSWORD_EXPIRING_138=password-expiring INFO_ACCTNOTTYPE_PASSWORD_RESET_139=password-reset INFO_ACCTNOTTYPE_PASSWORD_CHANGED_140=password-changed MILD_ERR_FILEPERM_SET_NO_SUCH_FILE_141=Unable to set permissions for file %s \ because it does not exist MILD_ERR_FILEPERM_CANNOT_EXEC_CHMOD_142=Unable to execute the chmod command \ to set file permissions on %s: %s SEVERE_ERR_FILEPERM_SET_JAVA_EXCEPTION_143=One or more exceptions were thrown \ in the process of updating the file permissions for %s. Some of the \ permissions for the file may have been altered SEVERE_ERR_FILEPERM_SET_JAVA_FAILED_ALTERED_144=One or more updates to the \ file permissions for %s failed, but at least one update was successful. Some \ of the permissions for the file may have been altered SEVERE_ERR_FILEPERM_SET_JAVA_FAILED_UNALTERED_145=All of the attempts to \ update the file permissions for %s failed. The file should be left with its \ original permissions MILD_ERR_FILEPERM_INVALID_UNIX_MODE_STRING_146=The provided string %s does \ not represent a valid UNIX file mode. UNIX file modes must be a \ three-character string in which each character is a numeric digit between \ zero and seven MILD_ERR_EXEC_DISABLED_147=The %s command will not be allowed because the \ Directory Server has been configured to refuse the use of the exec method SEVERE_ERR_VALIDATOR_PRECONDITION_NOT_MET_148=A precondition of the invoked \ method was not met. This This usually means there is a defect somewhere in \ the call stack. Details: %s INFO_GLOBAL_OPTIONS_149=Global Options: INFO_GLOBAL_OPTIONS_REFERENCE_150=See "%s --help" INFO_SUBCMD_OPTIONS_151=SubCommand Options: INFO_ARGPARSER_USAGE_152=Usage: INFO_SUBCMDPARSER_SUBCMD_HEADING_153=Available subcommands: INFO_SUBCMDPARSER_SUBCMD_REFERENCE_154=See "%s --help-{category}" INFO_SUBCMDPARSER_GLOBAL_HEADING_155=The global options are: INFO_GLOBAL_HELP_REFERENCE_156=See "%s --help" to get more usage help SEVERE_ERR_RENAMEFILE_CANNOT_RENAME_157=Failed to rename file %s to %s SEVERE_ERR_RENAMEFILE_CANNOT_DELETE_TARGET_158=Failed to delete target file \ %s. Make sure the file is not currently in use by this or another \ application SEVERE_ERR_EXPCHECK_TRUSTMGR_CLIENT_CERT_EXPIRED_159=Refusing to trust client \ or issuer certificate '%s' because it expired on %s SEVERE_ERR_EXPCHECK_TRUSTMGR_CLIENT_CERT_NOT_YET_VALID_160=Refusing to trust \ client or issuer certificate '%s' because it is not valid until %s SEVERE_ERR_EXPCHECK_TRUSTMGR_SERVER_CERT_EXPIRED_161=Refusing to trust server \ or issuer certificate '%s' because it expired on %s SEVERE_ERR_EXPCHECK_TRUSTMGR_SERVER_CERT_NOT_YET_VALID_162=Refusing to trust \ server or issuer certificate '%s' because it is not valid until %s MILD_WARN_LDIF_VALUE_VIOLATES_SYNTAX_163=Entry %s read from LDIF starting at \ line %d includes value "%s" for attribute %s that is invalid according to the \ associated syntax: %s SEVERE_ERR_SKIP_FILE_EXISTS_164=The specified skip file %s already exists and \ the import configuration indicates that no attempt should be made to append \ to or replace the file MILD_ERR_LDIF_SKIP_165=Skipping entry %s because the DN is not one that \ should be included based on the include and exclude branches INFO_SUBCMDPARSER_SUBCMD_HELP_HEADING_166=To get the list of subcommands use: SEVERE_ERR_EMBEDUTILS_SERVER_ALREADY_RUNNING_167=The Directory Server cannot \ be started because it is already running INFO_SUBCMDPARSER_OPTIONS_168={options} INFO_SUBCMDPARSER_SUBCMD_AND_OPTIONS_169={subcommand} {options} INFO_SUBCMDPARSER_WHERE_OPTIONS_INCLUDE_170=\ where {options} include: INFO_EMAIL_TOOL_DESCRIPTION_171=Send an e-mail message via SMTP INFO_EMAIL_HOST_DESCRIPTION_172=The address of the SMTP server to use to send \ the message INFO_EMAIL_FROM_DESCRIPTION_173=The address to use for the message sender INFO_EMAIL_TO_DESCRIPTION_174=The address to use for the message recipient INFO_EMAIL_SUBJECT_DESCRIPTION_175=The subject to use for the e-mail message INFO_EMAIL_BODY_DESCRIPTION_176=The path to the file containing the text for \ the message body INFO_EMAIL_ATTACH_DESCRIPTION_177=The path to a file to attach to the e-mail \ message INFO_EMAIL_HELP_DESCRIPTION_178=Display this usage information SEVERE_ERR_EMAIL_NO_SUCH_BODY_FILE_181=The file %s specified as the body file \ for the e-mail message does not exist SEVERE_ERR_EMAIL_CANNOT_PROCESS_BODY_FILE_182=An error occurred while \ attempting to process message body file %s: %s SEVERE_ERR_EMAIL_NO_SUCH_ATTACHMENT_FILE_183=The attachment file %s does not \ exist SEVERE_ERR_EMAIL_CANNOT_ATTACH_FILE_184=An error occurred while trying to \ attach file %s: %s SEVERE_ERR_EMAIL_CANNOT_SEND_MESSAGE_185=An error occurred while trying to \ send the e-mail message: %s INFO_BASE64_TOOL_DESCRIPTION_186=This utility can be used to encode and \ decode information using base64 INFO_BASE64_HELP_DESCRIPTION_187=Display this usage information INFO_BASE64_DECODE_DESCRIPTION_188=Decode base64-encoded information into \ raw data INFO_BASE64_ENCODE_DESCRIPTION_189=Encode raw data using base64 INFO_BASE64_ENCODED_DATA_DESCRIPTION_190=The base64-encoded data to be decoded INFO_BASE64_ENCODED_FILE_DESCRIPTION_191=The path to a file containing the \ base64-encoded data to be decoded INFO_BASE64_RAW_DATA_DESCRIPTION_192=The raw data to be base64 encoded INFO_BASE64_RAW_FILE_DESCRIPTION_193=The path to a file containing the raw \ data to be base64 encoded INFO_BASE64_TO_ENCODED_FILE_DESCRIPTION_194=The path to a file to which the \ base64-encoded data should be written INFO_BASE64_TO_RAW_FILE_DESCRIPTION_195=The path to a file to which the raw \ base64-decoded data should be written SEVERE_ERR_BASE64_CANNOT_READ_RAW_DATA_196=An error occurred while attempting \ to read the raw data to encode: %s SEVERE_ERR_BASE64_CANNOT_WRITE_ENCODED_DATA_197=An error occurred while \ attempting to write the encoded data: %s SEVERE_ERR_BASE64_CANNOT_READ_ENCODED_DATA_198=An error occurred while \ attempting to read the base64-encoded data: %s SEVERE_ERR_BASE64_CANNOT_WRITE_RAW_DATA_199=An error occurred while \ attempting to write the decoded data: %s SEVERE_ERR_BASE64_UNKNOWN_SUBCOMMAND_200=Unknown subcommand %s INFO_GENERAL_NO_201=no INFO_GENERAL_YES_202=yes SEVERE_ERR_CONSOLE_APP_CONFIRM_203=Invalid response. Please enter \ "%s" or "%s" INFO_MENU_OPTION_HELP_204=help INFO_MENU_OPTION_HELP_KEY_205=? INFO_MENU_OPTION_CANCEL_206=cancel INFO_MENU_OPTION_CANCEL_KEY_207=c INFO_MENU_OPTION_QUIT_208=quit INFO_MENU_OPTION_QUIT_KEY_209=q INFO_MENU_NUMERIC_OPTION_210=%d) INFO_MENU_CHAR_OPTION_211=%c) SEVERE_ERR_MENU_BAD_CHOICE_MULTI_212=Invalid response. Please enter one or \ more valid menu options SEVERE_ERR_MENU_BAD_CHOICE_SINGLE_213=Invalid response. Please enter a valid \ menu option SEVERE_ERR_MENU_BAD_CHOICE_MULTI_DUPE_214=The option "%s" was specified \ more than once. Please enter one or more valid menu options INFO_MENU_PROMPT_SINGLE_215=Enter choice: INFO_MENU_PROMPT_SINGLE_DEFAULT_216=Enter choice [%s]: INFO_MENU_PROMPT_MULTI_217=Enter one or more choices separated by commas: INFO_MENU_PROMPT_MULTI_DEFAULT_218=Enter one or more choices separated by commas [%s]: INFO_MENU_PROMPT_RETURN_TO_CONTINUE_219=Press RETURN to continue INFO_MENU_PROMPT_CONFIRM_220=%s (%s / %s) [%s]: SEVERE_ERR_CONSOLE_INPUT_ERROR_221=The response could not be read from the console due to the following error: %s INFO_MENU_OPTION_BACK_222=back INFO_MENU_OPTION_BACK_KEY_223=b SEVERE_ERR_LDIF_REJECTED_BY_PLUGIN_NOMESSAGE_224=Rejecting entry %s because \ it was rejected by a plugin SEVERE_ERR_LDIF_REJECTED_BY_PLUGIN_225=Rejecting entry %s because it was \ rejected by a plugin: %s INFO_LDAP_CONN_PROMPT_SECURITY_LDAP_226=LDAP INFO_LDAP_CONN_PROMPT_SECURITY_USE_SSL_227=LDAP with SSL INFO_LDAP_CONN_PROMPT_SECURITY_USE_START_TLS_228=LDAP with StartTLS INFO_LDAP_CONN_PROMPT_SECURITY_USE_TRUST_ALL_229=Automatically \ trust INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_PATH_230=Truststore path: INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_PASSWORD_231=Password for \ truststore '%s': INFO_LDAP_CONN_PROMPT_SECURITY_KEYSTORE_NEEDED_232=Do you want to perform \ secure authentication (client side authentication)? INFO_LDAP_CONN_PROMPT_SECURITY_KEYSTORE_PATH_233=Keystore path: INFO_LDAP_CONN_PROMPT_SECURITY_KEYSTORE_PASSWORD_234=Password for keystore \ '%s': INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_NAME_235=Certificate nickname: INFO_LDAP_CONN_HEADING_CONNECTION_PARAMETERS_236=>>>> Specify OpenDS LDAP \ connection parameters SEVERE_ERR_LDAP_CONN_BAD_HOST_NAME_237=The hostname "%s" could not be \ resolved. Please check you have provided the correct address SEVERE_ERR_LDAP_CONN_BAD_PORT_NUMBER_238=Invalid port number "%s". Please \ enter a valid port number between 1 and 65535 INFO_LDAP_CONN_PROMPT_HOST_NAME_239=Directory server hostname or IP address \ [%s]: INFO_LDAP_CONN_PROMPT_PORT_NUMBER_240=Directory server port number [%d]: INFO_LDAP_CONN_PROMPT_BIND_DN_241=Administrator user bind DN [%s]: INFO_LDAP_CONN_PROMPT_SECURITY_USE_SECURE_CTX_242=How do you want to connect? INFO_LDAP_CONN_PROMPT_SECURITY_PROTOCOL_DEFAULT_CHOICE_243=%d SEVERE_ERR_LDAP_CONN_PROMPT_SECURITY_INVALID_FILE_PATH_244=The provided path \ is not valid INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_METHOD_245=How do you want to trust the server certificate? INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_246=Use a truststore INFO_LDAP_CONN_PROMPT_SECURITY_MANUAL_CHECK_247=Manually validate INFO_LDAP_CONN_PROMPT_SECURITY_SERVER_CERTIFICATE_248=Server Certificate: INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_249=%s INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_250=Do you trust this server certificate? INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_NO_251=No INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_SESSION_252=Yes, for this session only INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_ALWAYS_253=Yes, also add it to a truststore INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_DETAILS_254=View certificate details INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_USER_DN_255 =User DN : %s INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_VALIDITY_256=Validity : From '%s'%n To '%s' INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_ISSUER_257 =Issuer : %s INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_ALIASES_258=Which certificate do you want to use? INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_ALIAS_259=%s (%s) INFO_SUBCMDPARSER_GLOBAL_HEADING_PREFIX_260=Global %s INFO_PROMPT_SINGLE_DEFAULT_261=%s [%s]: INFO_LDAP_CONN_PROMPT_ADMINISTRATOR_UID_262=Global Administrator User ID [%s]: INFO_LDAP_CONN_GLOBAL_ADMINISTRATOR_OR_BINDDN_PROMPT_263=Global Administrator \ User ID, or bind DN if no Global Administrator is defined [%s]: INFO_ARGPARSER_USAGE_JAVA_CLASSNAME_264=Usage: java %s {options} INFO_ARGPARSER_USAGE_JAVA_SCRIPTNAME_265=Usage: %s {options} INFO_ARGPARSER_USAGE_TRAILINGARGS_266={trailing-arguments} MILD_ERR_CONFIRMATION_TRIES_LIMIT_REACHED_267=Confirmation tries limit reached \ (%d) SEVERE_ERR_UNEXPECTED_268=Unexpected error. Details: %s MILD_ERR_TRIES_LIMIT_REACHED_269=Input tries limit reached (%d) INFO_ADMIN_CONN_PROMPT_PORT_NUMBER_270=Directory server administration port number [%d]: MILD_ERR_LDIF_INVALID_ATTR_OPTION_271=Unable to parse LDIF entry %s starting \ at line %d because it has an invalid binary option for attribute %s SEVERE_ERR_CERTMGR_INVALID_PKCS11_PATH_272=Invalid key store path for PKCS11 \ keystore, it must be %s SEVERE_ERR_CERTMGR_INVALID_KEYSTORE_PATH_273=Key store path %s exists but is \ not a file SEVERE_ERR_CERTMGR_INVALID_PARENT_274=Parent directory for key store path \ %s does not exist or is not a directory SEVERE_ERR_CERTMGR_INVALID_STORETYPE_275=Invalid key store type, it must \ be one of the following: %s, %s, %s or %s SEVERE_ERR_CERTMGR_KEYSTORE_NONEXISTANT_276=Keystore does not exist, \ it must exist to retrieve an alias, delete an alias or generate a \ certificate request SEVERE_ERR_CERTMGR_VALIDITY_277=Validity value %d is invalid, it must \ be a positive integer SEVERE_ERR_CERTMGR_ALIAS_ALREADY_EXISTS_278= A certificate with the alias \ %s already exists in the key store SEVERE_ERR_CERTMGR_ADD_CERT_279=The following error occured when \ adding a certificate with alias %s to the keystore: %s SEVERE_ERR_CERTMGR_ALIAS_INVALID_280=The alias %s is cannot be added to the \ keystore for one of the following reasons: it already exists in the \ keystore, or, it is not an instance of a trusted certificate class SEVERE_ERR_CERTMGR_CERT_REPLIES_INVALID_281=The alias %s is an instance of \ a private key entry, which is not supported being added to the keystore \ at this time SEVERE_ERR_CERTMGR_DELETE_ALIAS_282=The following error occured when \ deleting a certificate with alias %s from the keystore: %s SEVERE_ERR_CERTMGR_CERT_REQUEST_283=The following error occured when \ generating a certificate request with alias %s: %s SEVERE_ERR_CERTMGR_GEN_SELF_SIGNED_CERT_284=The following error occured when \ generating a self-signed certificate using the alias %s: %s SEVERE_ERR_CERTMGR_INVALID_CERT_FILE_285=The certificate file %s is \ invalid because it does not exists, or exists, but is not a file SEVERE_ERR_CERTMGR_ALIAS_CAN_NOT_DELETE_286=The alias %s cannot be \ deleted from the keystore because it does not exist SEVERE_ERR_CERTMGR_ALIAS_DOES_NOT_EXIST_287=The alias %s does not exist \ in the keystore so its key information cannot be retrieved SEVERE_ERR_CERTMGR_ALIAS_INVALID_ENTRY_TYPE_288=The alias %s is not a \ valid keystore entry type, so its key information cannot be retrieved SEVERE_ERR_CERTMGR_GET_KEY_289=The key information for alias %s \ cannot be retrieved because of the following reason: %s SEVERE_ERR_CERTMGR_PRIVATE_KEY_290=The private key for alias %s \ could not be retrieved because it was not a key related entry SEVERE_ERR_CERTMGR_ALIAS_NO_CERTIFICATE_291=The alias %s does not \ does not have a certificate associated with it SEVERE_ERR_CERTMGR_TRUSTED_CERT_292=The trusted certificate associated \ with alias %s could not be added to keystore because of the following \ reason: %s SEVERE_ERR_CERTMGR_FILE_NAME_INVALID_293=The %s is invalid because it is \ null SEVERE_ERR_CERTMGR_VALUE_INVALID_294=The argument %s is invalid because it \ is either null, or has zero length SEVERE_ERR_CERTMGR_CLASS_NOT_FOUND_295=A security class cannot be found \ in this JVM because of the following reason: %s SEVERE_ERR_CERTMGR_SECURITY_296=The security classes could not be \ initialized because of the following reason: %s SEVERE_ERR_CERTMGR_NO_METHOD_297=A method needed in the security classes \ could not be located because of the following reason: %s SEVERE_ERR_CERTMGR_CERT_SIGN_REQ_NOT_SUPPORTED_298=Certificate signing \ request generation is not supported on JVM supplied by this vendor: %s INFO_ARGPARSER_USAGE_DEFAULT_VALUE_299=Default value: %s SEVERE_WARN_EXPORT_LDIF_SET_PERMISSION_FAILED_300=An error occurred while \ setting file permissions for the LDIF file %s: %s MILD_ERR_LDIF_READ_ATTR_SKIP_301=Skipping entry %s because the following error \ was received when reading its attributes: %s