<?xml version="1.0" encoding="UTF-8"?>

<!--
  ~ JBoss, Home of Professional Open Source.
  ~ Copyright 2015, Red Hat, Inc., and individual contributors
  ~ as indicated by the @author tags. See the copyright.txt file in the
  ~ distribution for a full listing of individual contributors.
  ~
  ~ This is free software; you can redistribute it and/or modify it
  ~ under the terms of the GNU Lesser General Public License as
  ~ published by the Free Software Foundation; either version 2.1 of
  ~ the License, or (at your option) any later version.
  ~
  ~ This software is distributed in the hope that it will be useful,
  ~ but WITHOUT ANY WARRANTY; without even the implied warranty of
  ~ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  ~ Lesser General Public License for more details.
  ~
  ~ You should have received a copy of the GNU Lesser General Public
  ~ License along with this software; if not, write to the Free
  ~ Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  ~ 02110-1301 USA, or see the FSF site: http://www.fsf.org.
  -->

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:jboss:cli:2.0" targetNamespace="urn:jboss:cli:2.0"
    elementFormDefault="qualified" attributeFormDefault="unqualified">

    <xs:element name="jboss-cli">
        <xs:annotation>
            <xs:documentation>
                Root element for the WildFly Command Line Interface configuration.
            </xs:documentation>
        </xs:annotation>
        <xs:complexType>
            <xs:sequence>
                <xs:element name="default-protocol" minOccurs="0" default="http-remoting">
                    <xs:annotation>
                        <xs:documentation>
                            The default protocol to use when controller addresses are supplied without one.
                        </xs:documentation>
                    </xs:annotation>
                    <xs:complexType>
                        <xs:simpleContent>
                            <xs:extension base="xs:string">
                                <xs:attribute name="use-legacy-override" type="xs:boolean" default="true">
                                    <xs:annotation>
                                        <xs:documentation>
                                            The default protocol is used where a connection address is specified and no
                                            protocol is specified, in previous versions the port 9999 would have been used with the remoting
                                            protocol - this attribute set to true causes the protocol to default to remoting if the port
                                            number is 9999.

                                            If this attribute is set to false then the specified default is used regardless
                                            of the port number for addresses with no protocol.
                                        </xs:documentation>
                                    </xs:annotation>
                                </xs:attribute>
                            </xs:extension>
                        </xs:simpleContent>
                    </xs:complexType>
                </xs:element>

                <xs:element name="default-controller" type="controllerAddress" minOccurs="0">
                    <xs:annotation>
                        <xs:documentation>
                            If no default controller is specifed then the default will be assumed to be using host 'localhost'
                            along with the default-protocol (Which will be http-remoting if not defined) and the port will be whatever
                            default corresponds to the selected protocol.
                        </xs:documentation>
                    </xs:annotation>
                </xs:element>

                <xs:element name="controllers" type="controllersType" minOccurs="0">
                    <xs:annotation>
                        <xs:documentation>
                            The names controller alias mappings.
                        </xs:documentation>
                    </xs:annotation>
                </xs:element>

                <xs:element name="validate-operation-requests" type="xs:boolean" default="true" minOccurs="0">
                    <xs:annotation>
                        <xs:documentation>
                            Indicates whether the parameter list of the operation reuqests should be validated before the
                            requests are sent to the controller for the execution.
                        </xs:documentation>
                    </xs:annotation>
                </xs:element>

                <xs:element name="history" type="historyType" minOccurs="0" />

                <xs:element name="resolve-parameter-values" type="xs:boolean" minOccurs="0" maxOccurs="1" default="false">
                    <xs:annotation>
                        <xs:documentation>
                            Whether to resolve system properties specified as command argument (or operation parameter) values
                            before sending the operation request to the controller or let the resolution happen on the server side.
                        </xs:documentation>
                    </xs:annotation>
                </xs:element>

                <xs:element name="connection-timeout" type="xs:int" default="5000" minOccurs="0">
                    <xs:annotation>
                        <xs:documentation>
                            The time allowed to establish a connection with the controller.
                        </xs:documentation>
                    </xs:annotation>
                </xs:element>

                <xs:element name="ssl" type="sslType" minOccurs="0" />

                <xs:element name="silent" type="xs:boolean" default="false" minOccurs="1">
                    <xs:annotation>
                        <xs:documentation>
                            Whether to write info and error messages to the terminal output.
                            
                            Even if the value is false, the messages will still be logged using 
                            the logger if its configuration allows and/or if the output target was
                            specified as part of the command line using '>'.
                        </xs:documentation>
                    </xs:annotation>
                </xs:element>

                <xs:element name="access-control" type="xs:boolean" default="true" minOccurs="0">
                    <xs:annotation>
                        <xs:documentation>
                            Whether the management-related commands and attributes should be filtered for the current user
                            based on the permissions the user has been granted. In other words, if access-control is true, the
                            tab-completion will hide commands and attributes the user is not allowed to access. In case the user attempts to
                            execute a command or an operation without having sufficient permissions to do so, regardless of the value this
                            element has, the attempt will fail with an access control error.
                        </xs:documentation>
                    </xs:annotation>
                </xs:element>
            </xs:sequence>
        </xs:complexType>
    </xs:element>

    <xs:complexType name="controllerAddress">
        <xs:annotation>
            <xs:documentation>
                The address of a controller.
            </xs:documentation>
        </xs:annotation>
        <xs:sequence>
            <xs:element name="protocol" type="xs:string" minOccurs="0">
                <xs:annotation>
                    <xs:documentation>
                        If no protocol is specified then the value for 'default-protocol' will be used.
                    </xs:documentation>
                </xs:annotation>
            </xs:element>
            <xs:element name="host" type="xs:string" minOccurs="0" default="localhost" />
            <xs:element name="port" type="xs:int" minOccurs="0">
                <xs:annotation>
                    <xs:documentation>
                        If a port is not specified then the default port will be identified based on the protocol selected.
                    </xs:documentation>
                </xs:annotation>
            </xs:element>
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="namedController">
        <xs:complexContent>
            <xs:extension base="controllerAddress">
                <xs:attribute name="name" use="required">
                    <xs:annotation>
                        <xs:documentation>
                            The name of this controller alias.
                        </xs:documentation>
                    </xs:annotation>
                </xs:attribute>
            </xs:extension>
        </xs:complexContent>
    </xs:complexType>

    <xs:complexType name="controllersType">
        <xs:sequence>
            <xs:element name="controller" type="namedController" maxOccurs="unbounded" />
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="historyType">
        <xs:annotation>
            <xs:documentation>
                This element contains the configuration for the commands and operations history log.
            </xs:documentation>
        </xs:annotation>
        <xs:sequence>
            <xs:element name="enabled" type="xs:boolean" minOccurs="0" default="true" />
            <xs:element name="file-name" type="xs:string" minOccurs="0" default=".jboss-cli-history" />
            <xs:element name="file-dir" type="xs:string" minOccurs="0" default="${user.home}" />
            <xs:element name="max-size" type="xs:int" minOccurs="0" default="500" />
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="sslType">
        <xs:annotation>
            <xs:documentation>
                This element contains the configuration for the Key and Trust stores
                used for SSL.
            </xs:documentation>
        </xs:annotation>
        <xs:sequence>
            <xs:element name="vault" type="vaultType" minOccurs="0" />
            <xs:element name="key-store" type="xs:string" minOccurs="0" />
            <xs:element name="key-store-password" type="xs:string" minOccurs="0" />
            <xs:element name="alias" type="xs:string" minOccurs="0" />
            <xs:element name="key-password" type="xs:string" minOccurs="0" />
            <xs:element name="trust-store" type="xs:string" minOccurs="0" />
            <xs:element name="trust-store-password" type="xs:string" minOccurs="0" />
            <xs:element name="modify-trust-store" type="xs:boolean" default="true" minOccurs="0">
                <xs:annotation>
                    <xs:documentation>
                        Setting to true will cause the CLI to prompt when unrecognised certificates are received and allow
                        them to be stored in the truststore.
                    </xs:documentation>
                </xs:annotation>
            </xs:element>
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="vaultType">
        <xs:annotation>
            <xs:documentation>
                Element of this type points to a file with vault configuration.
            </xs:documentation>
        </xs:annotation>
        <xs:attribute name="file" type="xs:string" use="required">
            <xs:annotation>
                <xs:documentation>
                    Absolute or relative file system path to the XML file
                    containing the vault configuration.
                </xs:documentation>
            </xs:annotation>
        </xs:attribute>
        <xs:attribute name="relative-to" type="xs:string" use="optional">
            <xs:annotation>
                <xs:documentation>
                    One of the system-provided named paths (such as jboss.home.dir,
                    user.home, user.dir) relative to which the absolute path
                    will be calculated for the path specified in the file attribute.
                </xs:documentation>
            </xs:annotation>
        </xs:attribute>
    </xs:complexType>
</xs:schema>
