[[General_configuration_concepts]]
= General configuration concepts

ifdef::env-github[]
:tip-caption: :bulb:
:note-caption: :information_source:
:important-caption: :heavy_exclamation_mark:
:caution-caption: :fire:
:warning-caption: :warning:
endif::[]

For both a managed domain or a standalone server, a number of common
configuration concepts apply:

[[extensions]]
== Extensions

An extension is a module that extends the capabilities and management API of the
server kernel. The WildFly kernel is very simple and lightweight; most of the
capabilities people associate with an application server are provided
via extensions. An extension is packaged as a module in the `modules`
folder. An extension module provides an implementation of the `org.jboss.as.controller.Extension` interface, which is used to add one or more new <<profiles-and-subsystems,subsystems>> to WildFly's management API. The user indicates that they want a particular extension to be
available by including an `<extension/>` element naming its module in
the `domain.xml` or `standalone.xml` file.

[source,xml,options="nowrap"]
----
<extensions>
    [...]
    <extension module="org.jboss.as.transactions"/>
    <extension module="org.jboss.as.webservices" />
    <extension module="org.jboss.as.weld" />
    [...]
    <extension module="org.wildfly.extension.undertow"/>
</extensions>
----

[[profiles-and-subsystems]]
== Profiles and Subsystems

The most significant part of the configuration in `domain.xml` and
`standalone.xml` is the configuration of one (in `standalone.xml`) or
more (in `domain.xml`) "profiles". A profile is a named set of subsystem
configurations. A subsystem is an added set of capabilities added to the
core server by an extension (see <<extensions,"Extensions">> above). A subsystem
provides servlet handling capabilities; a subsystem provides a Jakarta Enterprise Beans
container; a subsystem provides Jakarta Transactions, etc. A profile is a named list of
subsystems, along with the details of each subsystem's configuration. A
profile with a large number of subsystems results in a server with a
large set of capabilities. A profile with a small, focused set of
subsystems will have fewer capabilities but a smaller footprint.

The content of an individual profile configuration looks largely the
same in `domain.xml` and `standalone.xml`. The only difference is
`standalone.xml` is only allowed to have a single profile element (the
profile the server will run), while `domain.xml` can have many profiles,
each of which can be mapped to one or more groups of servers.

The contents of individual subsystem configurations look exactly the
same between `domain.xml` and `standalone.xml`.

[[paths]]
== Paths

A logical name for a filesystem path. The `domain.xml`, `host.xml` and
`standalone.xml` configurations all include a section where paths can be
declared. Other sections of the configuration can then reference those
paths by their logical name, rather than having to include the full
details of the path (which may vary on different machines). For example,
the logging subsystem configuration includes a reference to the "
`jboss.server.log.dir`" path that points to the server's " `log`"
directory.

[source,xml,options="nowrap"]
----
<file relative-to="jboss.server.log.dir" path="server.log"/>
----

WildFly automatically provides a number of standard paths without any
need for the user to configure them in a configuration file:

* `jboss.home`.dir - the root directory of the WildFly distribution
* `user.home` - user's home directory
* `user.dir` - user's current working directory
* `java.home` - java installation directory
* `jboss.server.base.dir` - root directory for an individual server
instance
* `jboss.server.config.dir` - directory the server will use for
configuration file storage
* `jboss.server.data.dir` - directory the server will use for persistent
data file storage
* `jboss.server.log.dir` - directory the server will use for log file
storage
* `jboss.server.temp.dir` - directory the server will use for temporary
file storage
* `jboss.controller.temp.dir` - directory the server will use for
temporary file storage
* `jboss.domain.servers.dir` - directory under which a host controller
will create the working area for individual server instances (managed
domain mode only)

Users can add their own paths or override all except the first 5 of the
above by adding a `<path/>` element to their configuration file.

[source,xml,options="nowrap"]
----
<path name="example" path="example" relative-to="jboss.server.data.dir"/>
----

The attributes are:

* `name` -- the name of the path.
* `path` -- the actual filesystem path. Treated as an absolute path,
unless the 'relative-to' attribute is specified, in which case the value
is treated as relative to that path.
* `relative-to` -- (optional) the name of another previously named path,
or of one of the standard paths provided by the system.

A `<path/>` element in a `domain.xml` need not include anything more
than the `name` attribute; i.e. it need not include any information
indicating what the actual filesystem path is:

[source,xml,options="nowrap"]
----
<path name="x"/>
----

Such a configuration simply says, "There is a path named 'x' that other
parts of the `domain.xml` configuration can reference. The actual
filesystem location pointed to by 'x' is host-specific and will be
specified in each machine's `host.xml` file." If this approach is used,
there must be a path element in each machine's `host.xml` that specifies
what the actual filesystem path is:

[source,xml,options="nowrap"]
----
<path name="x" path="/var/x" />
----

A `<path/>` element in a `standalone.xml` must include the specification
of the actual filesystem path.

[[interfaces]]
== Interfaces

A logical name for a network interface/IP address/host name to which
sockets can be bound. The `domain.xml`, `host.xml` and `standalone.xml`
configurations all include a section where interfaces can be declared.
Other sections of the configuration can then reference those interfaces
by their logical name, rather than having to include the full details of
the interface (which may vary on different machines). An interface
configuration includes the logical name of the interface as well as
information specifying the criteria to use for resolving the actual
physical address to use. See <<Interfaces_and_ports,Interfaces
and ports>> for further details.

An `<interface/>` element in a `domain.xml` need not include anything
more than the `name` attribute; i.e. it need not include any information
indicating what the actual IP address associated with the name is:

[source,xml,options="nowrap"]
----
<interface name="internal"/>
----

Such a configuration simply says, "There is an interface named
'internal' that other parts of the domain.xml configuration can
reference. The actual IP address pointed to by 'internal' is
host-specific and will be specified in each machine's host.xml file." If
this approach is used, there must be an interface element in each
machine's `host.xml` that specifies the criteria for determining the IP
address:

[source,xml,options="nowrap"]
----
<interface name="internal">
   <nic name="eth1"/>
</interface>
----

An `<interface/>` element in a `standalone.xml` must include the
criteria for determining the IP address.

See link:#interface-declarations[Interface declarations]
for full details.

[[socket-bindings-and-socket-binding-groups]]
== Socket Bindings and Socket Binding Groups

A socket binding is a named configuration for a socket.

The `domain.xml` and `standalone.xml` configurations both include a
section where named socket configurations can be declared. Other
sections of the configuration can then reference those sockets by their
logical name, rather than having to include the full details of the
socket configuration (which may vary on different machines).
See link:#socket-binding-groups[Socket Binding Groups]
for full details.

== System Properties

System property values can be set in a number of places in `domain.xml`,
`host.xml` and `standalone.xml`. The values in `standalone.xml` are set
as part of the server boot process. Values in `domain.xml` and
`host.xml` are applied to servers when they are launched.

When a system property is configured in `domain.xml` or `host.xml`, the
servers it ends up being applied to depends on where it is set. Setting
a system property in a child element directly under the `domain.xml`
root results in the property being set on all servers. Setting it in a
`<system-property/>` element inside a `<server-group/>` element in
domain.xml results in the property being set on all servers in the
group. Setting it in a child element directly under the `host.xml` root
results in the property being set on all servers controlled by that
host's Host Controller. Finally, setting it in a `<system-property/>`
element inside a `<server/>` element in `host.xml` result in the
property being set on that server. The same property can be configured
in multiple locations, with a value in a `<server/>` element taking
precedence over a value specified directly under the `host.xml` root
element, the value in a `host.xml` taking precedence over anything from
`domain.xml`, and a value in a `<server-group/>` element taking
precedence over a value specified directly under the `domain.xml` root
element.

== Script Configuration Files

Scripts are located in the `$JBOSS_HOME/bin` directory. Within this directory you will find script configuration files
for standalone and domain startup scripts for each platform. These files can be used to configure your environment
without having to edit the scripts themselves. For example, you can configure the `JAVA_OPTS` environment variable to
configure the JVM before the container is launched.

=== Standalone Script Configuration Files:

* `standalone.conf` invoked from `standalone.sh`
* `standalone.conf.bat` invoked from `standalone.bat`
* `standalone.conf.ps1` invoked from `standalone.ps1`

=== Domain Script Configuration Files:

* `domain.conf` invoked from `domain.sh`
* `domain.conf.bat` invoked from `domain.bat`
* `domain.conf.ps1` invoked from `domain.ps1`

By default, these are in the `$JBOSS_HOME/bin` directory. However, you can set the `STANDALONE_CONF` environment
variable for standalone servers or `DOMAIN_CONF` environment variable for domain servers with a value of the
absolute path to the file.

=== Common Script Configuration Files

Starting with WildFly 23, common configuration files were introduced. These files are invoked from every script in the
`$JBOSS_HOME/bin` directory. While these configuration files are not present in the directory by default, they
can be added. You can simply just add the `common.conf` configuration file for the script type you want to
execute and all scripts in the directory will invoke the configuration script.

* `common.conf` for bash scripts
* `common.conf.bat` for Windows batch scripts
* `common.conf.ps1` for PowerShell scripts

You can also set the `COMMON_CONF` environment variable to have this configuration script live outside the
`$JBOSS_HOME/bin` directory.

NOTE: If you provide a common configuration file it will be invoked before the standalone and domain script
configuration files. For example invoking `standalone.sh` first invokes the `common.conf` then later invokes
the `standalone.conf`.
