org.rhq.enterprise.agent.i18n
Interface AgentSetupInstructions
@I18NResourceBundle(baseName="agent-setup",
defaultLocale="en")
public interface AgentSetupInstructions
Constants and resource bundle keys that define the setup instructions when setting up the agent.
- Author:
- John Mazzitelli
BASE_BUNDLE_NAME
static final mazz.i18n.Msg.BundleBaseName BASE_BUNDLE_NAME
- This is the base bundle name of the resource bundle where all of the below messages are stored.
SETUP_INSTRUCTION_SERVERTRANSPORT_PREF
static final String SETUP_INSTRUCTION_SERVERTRANSPORT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRANSPORT_DEFAULT
static final String SETUP_INSTRUCTION_SERVERTRANSPORT_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRANSPORT_PROMPT
@I18NMessages(value=@I18NMessage(value="RHQ Server Transport Protocol"))
static final String SETUP_INSTRUCTION_SERVERTRANSPORT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRANSPORT_HELP
@I18NMessages(value=@I18NMessage(value="The transport used to send messages to the RHQ Server.\\n\\\nAcceptable values are either servlet or sslservlet. If you want this agent to\\n\\\ntalk to the server securely over an encrypted repo, use sslservlet."))
static final String SETUP_INSTRUCTION_SERVERTRANSPORT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERBINDADDR_PREF
static final String SETUP_INSTRUCTION_SERVERBINDADDR_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERBINDADDR_DEFAULT
static final String SETUP_INSTRUCTION_SERVERBINDADDR_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERBINDADDR_PROMPT
@I18NMessages(value=@I18NMessage(value="RHQ Server Hostname or IP Address"))
static final String SETUP_INSTRUCTION_SERVERBINDADDR_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERBINDADDR_HELP
@I18NMessages(value=@I18NMessage(value="The hostname or IP address the RHQ Server will bind to in order to\\n\\\nlisten for incoming messages from agents."))
static final String SETUP_INSTRUCTION_SERVERBINDADDR_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERPORT_PREF
static final String SETUP_INSTRUCTION_SERVERPORT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERPORT_DEFAULT
static final String SETUP_INSTRUCTION_SERVERPORT_DEFAULT
SETUP_INSTRUCTION_SERVERPORT_PROMPT
@I18NMessages(value=@I18NMessage(value="RHQ Server Port"))
static final String SETUP_INSTRUCTION_SERVERPORT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERPORT_HELP
@I18NMessages(value=@I18NMessage(value="The port that the RHQ Server listens to for incoming messages from agents."))
static final String SETUP_INSTRUCTION_SERVERPORT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_PREF
static final String SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_DEFAULT
static final String SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_PROMPT
@I18NMessages(value=@I18NMessage(value="RHQ Server Transport Parameters"))
static final String SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_HELP
@I18NMessages(value=@I18NMessage(value="A set of transport parameters that is used to further configure\\n\\\nhow the agent connects to the server. Any value you provide here\\n\\\nwill overwrite (not augment) the current value.\\n\\\nSee the documentation for information on the format of this setting\\n\\\nand all the different values allowed for the specific transport being used."))
static final String SETUP_INSTRUCTION_SERVERTRANSPORTPARAMS_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERALIAS_PREF
static final String SETUP_INSTRUCTION_SERVERALIAS_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERALIAS_DEFAULT
static final String SETUP_INSTRUCTION_SERVERALIAS_DEFAULT
SETUP_INSTRUCTION_SERVERALIAS_PROMPT
@I18NMessages(value=@I18NMessage(value="RHQ Server Alias"))
static final String SETUP_INSTRUCTION_SERVERALIAS_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERALIAS_HELP
@I18NMessages(value=@I18NMessage(value="If the RHQ Server hostname or IP address was not set,\\n\\\nthis DNS alias name will be looked up and used as the RHQ Server host.\\n\\\nNot setting this preference will disable this DNS alias lookup feature"))
static final String SETUP_INSTRUCTION_SERVERALIAS_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERAUTODETECT_PREF
static final String SETUP_INSTRUCTION_SERVERAUTODETECT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERAUTODETECT_DEFAULT
static final String SETUP_INSTRUCTION_SERVERAUTODETECT_DEFAULT
SETUP_INSTRUCTION_SERVERAUTODETECT_PROMPT
@I18NMessages(value=@I18NMessage(value="Enable RHQ Server Auto-Detection?"))
static final String SETUP_INSTRUCTION_SERVERAUTODETECT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERAUTODETECT_HELP
@I18NMessages(value=@I18NMessage(value="If true, the agent will attempt to auto-detect the RHQ Server\\n\\\ncoming online and going offline. This is more efficient than\\n\\\nserver polling but it requires multicast traffic to be enabled on\\n\\\nyour network and also requires the multicast detector be enabled."))
static final String SETUP_INSTRUCTION_SERVERAUTODETECT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERPOLLING_PREF
static final String SETUP_INSTRUCTION_SERVERPOLLING_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERPOLLING_DEFAULT
static final String SETUP_INSTRUCTION_SERVERPOLLING_DEFAULT
SETUP_INSTRUCTION_SERVERPOLLING_PROMPT
@I18NMessages(value=@I18NMessage(value="RHQ Server Polling Interval"))
static final String SETUP_INSTRUCTION_SERVERPOLLING_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERPOLLING_HELP
@I18NMessages(value=@I18NMessage(value="If this value is larger than 0, it indicates the agent\\n\\\nshould periodically poll the RHQ Server to make sure it is still\\n\\\nup or (if it was down) see when it comes back up. The value is\\n\\\nthe number of milliseconds to wait in between polls. If the\\n\\\nvalue is 0, server polling is disabled. Server polling\\n\\\nis less efficient that the auto-detection mechanism,\\n\\\nbut server polling does not use multicasting, and thus might\\n\\\nbe the only way for the agent to detect the server."))
static final String SETUP_INSTRUCTION_SERVERPOLLING_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTDATADIR_PREF
static final String SETUP_INSTRUCTION_AGENTDATADIR_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTDATADIR_DEFAULT
static final String SETUP_INSTRUCTION_AGENTDATADIR_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTDATADIR_PROMPT
@I18NMessages(value=@I18NMessage(value="Data Directory"))
static final String SETUP_INSTRUCTION_AGENTDATADIR_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTDATADIR_HELP
@I18NMessages(value=@I18NMessage(value="Directory location where the agent will persist its data."))
static final String SETUP_INSTRUCTION_AGENTDATADIR_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERQSIZE_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERQSIZE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERQSIZE_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERQSIZE_DEFAULT
SETUP_INSTRUCTION_CLIENTSENDERQSIZE_PROMPT
@I18NMessages(value=@I18NMessage(value="Command Queue Size"))
static final String SETUP_INSTRUCTION_CLIENTSENDERQSIZE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERQSIZE_HELP
@I18NMessages(value=@I18NMessage(value="The maximum number of commands that can be queued for sending to the RHQ Server.\\n\\\nIf this is 0, then the queue is unbounded (be careful - setting this to 0\\n\\\ncould cause the agent to use up too much memory if, for some reason,\\n\\\ncommands are getting queued but are unable to be sent"))
static final String SETUP_INSTRUCTION_CLIENTSENDERQSIZE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_DEFAULT
SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_PROMPT
@I18NMessages(value=@I18NMessage(value="Maximum Commands To Concurrently Send"))
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_HELP
@I18NMessages(value=@I18NMessage(value="The maximum number of commands that can be in the process\\n\\\nof being sent to the RHQ Server at any one time."))
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXCONCURRENT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_DEFAULT
SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_PROMPT
@I18NMessages(value=@I18NMessage(value="Command Send Timeout"))
static final String SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_HELP
@I18NMessages(value=@I18NMessage(value="The time in milliseconds that the agent will wait\\n\\\nbefore aborting a command. This is the amount of time in\\n\\\nmilliseconds that the RHQ Server has in order to process commands.\\n\\\nThis value is only the default if a command has not specified\\n\\\nits own timeout. A command can override this by setting its\\n\\\nown timeout in its command configuration, so this value may\\n\\\nnot be used for all commands that are sent. If this value is\\n\\\nless than or equal to 0, there will be no default timeout\\n\\\nand commands will therefore be allowed to take as long as they\\n\\\nneed (again, this is the default, individual commands may\\n\\\noverride this and set their own timeout). While this infinite\\n\\\ntimeout default could conceivably cause a thread to hang\\n\\\nwaiting for a rogue command that never finishes, it also reduces\\n\\\nthe amount of short-lived threads created by the agent\\n\\\nand will increase throughput, dramatically in some cases."))
static final String SETUP_INSTRUCTION_CLIENTSENDERTIMEOUT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_DEFAULT
SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_PROMPT
@I18NMessages(value=@I18NMessage(value="Command Send Retry Interval"))
static final String SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_HELP
@I18NMessages(value=@I18NMessage(value="This is the minimum amount of time, in milliseconds, the agent\\n\\\nwill wait before trying to resend a guaranteed command\\n\\\nthat previously failed. This is not a guarantee of when\\n\\\na command is retried - all that can be inferred is that a\\n\\\ncommand that fails to be sent will not be retried until at\\n\\\nleast this amount of time passes.\\n\\\nNote: if the agent is currently waiting in this retry pause\\n\\\nperiod, the agent will not be able to be shutdown until that\\n\\\nretry period is over. In other words, if the agent is asked\\n\\\nto shutdown, it will wait for those commands waiting in this\\n\\\nretry interval to wake up. This is to help ensure those\\n\\\ncommands are not lost. Keep this time period short enough\\n\\\nto make agent shutdowns fairly responsive but long enough\\n\\\nto avoid spinning the agent with continuous resending of\\n\\\ncommands during periods of RHQ Server downtime. It is\\n\\\nrecommended to use auto-detection or server polling in order\\n\\\nto automatically stop the agent from continuously\\n\\\ntrying to retry commands during long periods of RHQ\\n\\\nServer downtime."))
static final String SETUP_INSTRUCTION_CLIENTSENDERRETRYINTERVAL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_DEFAULT
SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_PROMPT
@I18NMessages(value=@I18NMessage(value="Command Send Max Retries"))
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_HELP
@I18NMessages(value=@I18NMessage(value="If a guaranteed delivery message is sent, but the agent fails\\n\\\nto connect to the server and deliver the message, it will\\n\\\nalways be retried. However, if the error was something other\\n\\\nthan a \'cannot connect\' error, the command will only be retried\\n\\\nthis amount of times before the command is dropped. When this\\n\\\nhappens, the guaranteed command will never be delivered. This\\n\\\nwill normally happen under very odd and rare circumstances.\\n\\\nAlso, this setting only effects asynchronous messages that are\\n\\\nsent with guaranteed delivery. This setting has no effect\\n\\\non other messages."))
static final String SETUP_INSTRUCTION_CLIENTSENDERMAXRETRIES_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_PROMPT
@I18NMessages(value=@I18NMessage(value="Command Spool File Parameters"))
static final String SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_HELP
@I18NMessages(value=@I18NMessage(value="This defines the parameters for the command spool file.\\n\\\nThe spool file is where the agent persists commands that\\n\\\nare flagged for guaranteed delivery and need to be sent.\\n\\\nThe format is defined as \'max-file-size:purge-percentage\'.\\n\\\nThe first number is the size, in bytes, of the maximum file\\n\\\nsize threshold. If the spool file grows larger than this, a\\n\\\npurge will be triggered in order to shrink the file.\\n\\\nThe second number is the purge percentage which indicates how\\n\\\nlarge the file is allowed to be after a purge. This is\\n\\\nspecified as a percentage of the first parameter - the max\\n\\\nfile size threshold. For example, if the max file size is\\n\\\n100000 (i.e. 100KB) and the purge percentage is 90, then when\\n\\\nthe spool file grows larger than 100KB, a purge will be\\n\\\ntriggered and the file will be shrunk to no more than\\n\\\n90% of 100KB - which is 90KB. In effect, 10KB will be freed\\n\\\nto allow room for new commands to be spooled. When this\\n\\\noccurs, unused space is freed first and if that does not\\n\\\nfree up enough space, the oldest commands in the spool file\\n\\\nwill be sacrificed in order to make room for the newer\\n\\\ncommands.\\n\\\nThe maximum file size must be at least 10000 bytes.\\n\\\nThe purge percentage must be between 0 and 99.\\n\\\n"))
static final String SETUP_INSTRUCTION_CLIENTSENDERSPOOLPARAMS_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_DEFAULT
SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_PROMPT
@I18NMessages(value=@I18NMessage(value="Compress the Spool File?"))
static final String SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_HELP
@I18NMessages(value=@I18NMessage(value="If this flag is true, the commands stored in the spool file\\n\\\nwill be compressed. This can potentially save about 30%-40% in\\n\\\ndisk space (give or take), however, it slows down the\\n\\\npersistence mechanism considerably. Recommended setting for\\n\\\nthis should be false unless something on the agent deployment\\n\\\nbox warrants disk-saving over persistence performance. The\\n\\\nperformance hit will only appear when unusual conditions occur,\\n\\\nsuch as shutting down while some guaranteed commands have not\\n\\\nbeen sent yet or if the RHQ Server is down. It will not affect\\n\\\nthe agent under normal conditions (while running with the RHQ\\n\\\nServer up and successfully communicating with the agent).\\n\\\nIn those unusual/rare conditions, having performance degradation\\n\\\nmay not be as important."))
static final String SETUP_INSTRUCTION_CLIENTSENDERCOMPRESSSPOOL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_PROMPT
@I18NMessages(value=@I18NMessage(value="Send Throttling Parameters"))
static final String SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_HELP
@I18NMessages(value=@I18NMessage(value="If this setting is defined, it will enable send throttling to\\n\\\noccur while sending commands to the server. The format is\\n\\\ndefined as \'max-commands:quiet-period-milliseconds\'\\n\\\nwhere the maximum commands defines the maximum number\\n\\\nof commands that will be sent before the start of a quiet\\n\\\nperiod. The quiet period defines the number of milliseconds\\n\\\nin which no commands should be sent. After this duration\\n\\\nexpires, commands can again be sent, up to the maximum defined.\\n\\\nNote that send throttling only affects those commands that\\n\\\nare throttle-able. Some commands are sent as soon as\\n\\\npossible, regardless of the throttling settings.\\n\\\nTo disable send throttling, set this to its internal default.\\n\\\nThe maximum commands must be at least 1.\\n\\\nThe quiet period must be at least 100 milliseconds.\\n\\\n\\n\\\nThis affects sending commands synchronously and asynchronously."))
static final String SETUP_INSTRUCTION_CLIENTSENDERSENDTHROTTLING_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_PREF
static final String SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_PROMPT
@I18NMessages(value=@I18NMessage(value="Queue Throttling Parameters"))
static final String SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_HELP
@I18NMessages(value=@I18NMessage(value="If this setting is defined, it will enable queue throttling to\\n\\\noccur while sending commands to the server. The format is\\n\\\ndefined as \'max-commands-per-burst:burst-period-milliseconds\'\\n\\\nwhere the maximum commands per burst defines the maximum number\\n\\\nof commands that can be dequeued within a burst period. The\\n\\\nburst period defines the number of milliseconds in which the\\n\\\ndefined maximum number of commands can be dequeued. If more\\n\\\nthan the maximum number of commands are queued within this\\n\\\ntime period, they will wait until the next burst period starts\\n\\\nbefore being able to be dequeued.\\n\\\nThe maximum commands per burst must be at least 1.\\n\\\nThe burst period must be at least 100 milliseconds.\\n\\\n\\n\\\nThis does not affect sending commands synchronously. It only\\n\\\neffects commands queued to be sent asynchronously."))
static final String SETUP_INSTRUCTION_CLIENTSENDERQTHROTTLING_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTOR_PREF
static final String SETUP_INSTRUCTION_MULTICASTDETECTOR_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTOR_HELP
@I18NMessages(value=@I18NMessage(value="If true, a multicast detector will be started within the agent.\\n\\\nThis service will listen for new remote servers coming online\\n\\\ngoing offline. This must be enabled if you enabled server auto-detection.\\n\\\nIf you enable this, your network must support multicast traffic."))
static final String SETUP_INSTRUCTION_MULTICASTDETECTOR_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_PREF
static final String SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_DEFAULT
static final String SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_PROMPT
@I18NMessages(value=@I18NMessage(value="Multicast Detector Multicast Address"))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_HELP
@I18NMessages(value=@I18NMessage(value="The multicast address used to broadcast detection messages.\\n\\\nTo be more specific, it is the IP address of the multicast group\\n\\\nthe detector will join."))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORMCADDR_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_PREF
static final String SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_DEFAULT
static final String SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_PROMPT
@I18NMessages(value=@I18NMessage(value="Multicast Detector Bind Address"))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_HELP
@I18NMessages(value=@I18NMessage(value="The IP address that is bound by the network interface"))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORBINDADDR_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORPORT_PREF
static final String SETUP_INSTRUCTION_MULTICASTDETECTORPORT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORPORT_DEFAULT
static final String SETUP_INSTRUCTION_MULTICASTDETECTORPORT_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORPORT_PROMPT
@I18NMessages(value=@I18NMessage(value="Multicast Detector Port"))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORPORT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORPORT_HELP
@I18NMessages(value=@I18NMessage(value="The port that is used to broadcast detection messages on via multicast."))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORPORT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_PREF
static final String SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_DEFAULT
static final String SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Multicast Detector Server-Down Detection Default Time Delay"))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_HELP
@I18NMessages(value=@I18NMessage(value="If no RHQ Server heartbeat message is received within this amount\\n\\\nof milliseconds, it will be assumed the RHQ Server has gone down.\\n\\\nThis setting affects the timeliness of the auto-detection mechanism."))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORDEFAULTTIMEDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_PREF
static final String SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_DEFAULT
static final String SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Multicast Detector Heartbeat Time Delay"))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_HELP
@I18NMessages(value=@I18NMessage(value="This is the time delay that the agent will wait before it\\n\\\nemits its own heartbeat message."))
static final String SETUP_INSTRUCTION_MULTICASTDETECTORHEARTBEATTIMEDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORT_PREF
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORT_DEFAULT
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORT_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORT_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Transport Protocol"))
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORT_HELP
@I18NMessages(value=@I18NMessage(value="The transport that the agent expects incoming messages to flow over.\\n\\\nTypical values are socket and sslsocket."))
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORBINDADDR_PREF
static final String SETUP_INSTRUCTION_CONNECTORBINDADDR_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORBINDADDR_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Hostname or IP Address"))
static final String SETUP_INSTRUCTION_CONNECTORBINDADDR_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORBINDADDR_HELP
@I18NMessages(value=@I18NMessage(value="The hostname or IP address the agent will bind to in order to\\n\\\nlisten for incoming messages. Usually, you will want to leave this undefined so\\n\\\nthe agent picks up its default local IP address as it is currently configured\\n\\\nin the operation system. If, for some reason, the operating system default IP\\n\\\naddress is not the one you want to use, then you can set an explicit value\\n\\\nhere. Realize that if you do this, and the agent later changes its assigned IP,\\n\\\nyou must reconfigure the agent to use the new IP; otherwise, the agent will not\\n\\\nbe able to communicate with the server."))
static final String SETUP_INSTRUCTION_CONNECTORBINDADDR_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORPORT_PREF
static final String SETUP_INSTRUCTION_CONNECTORPORT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORPORT_DEFAULT
static final String SETUP_INSTRUCTION_CONNECTORPORT_DEFAULT
SETUP_INSTRUCTION_CONNECTORPORT_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Port"))
static final String SETUP_INSTRUCTION_CONNECTORPORT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORPORT_HELP
@I18NMessages(value=@I18NMessage(value="The port that the agent listens to for incoming messages."))
static final String SETUP_INSTRUCTION_CONNECTORPORT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_PREF
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_DEFAULT
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Transport Parameters"))
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_HELP
@I18NMessages(value=@I18NMessage(value="A set of transport parameters that is used to further configure\\n\\\nthe agent listener. Any value you provide here will overwrite (not augment)\\n\\\nthe current value. See the documentation for information on\\n\\\nthe format of this setting and all the different values allowed\\n\\\nfor the specific transport being used."))
static final String SETUP_INSTRUCTION_CONNECTORTRANSPORTPARAMS_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORLEASE_PREF
static final String SETUP_INSTRUCTION_CONNECTORLEASE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORLEASE_DEFAULT
static final String SETUP_INSTRUCTION_CONNECTORLEASE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORLEASE_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Listener Lease Period"))
static final String SETUP_INSTRUCTION_CONNECTORLEASE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CONNECTORLEASE_HELP
@I18NMessages(value=@I18NMessage(value="The number of milliseconds that the RHQ Server has before it\\n\\\nneeds to update its lease with this agent. This lease is only\\n\\\nneeded during a single connection with the agent. Once the RHQ\\n\\\nServer finishes sending the agent its message and closes its\\n\\\nconnection with the agent, the lease no longer needs updating.\\n\\\nIf this is 0 or less, the RHQ Server does not need a lease."))
static final String SETUP_INSTRUCTION_CONNECTORLEASE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_STREAMIDLE_PREF
static final String SETUP_INSTRUCTION_STREAMIDLE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_STREAMIDLE_DEFAULT
static final String SETUP_INSTRUCTION_STREAMIDLE_DEFAULT
SETUP_INSTRUCTION_STREAMIDLE_PROMPT
@I18NMessages(value=@I18NMessage(value="Remote Stream Max Idle Time"))
static final String SETUP_INSTRUCTION_STREAMIDLE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_STREAMIDLE_HELP
@I18NMessages(value=@I18NMessage(value="The maximum amount of milliseconds a remoted stream\\n\\\nis allowed to be idle before it is automatically closed and\\n\\\nremoved from the agent listener. This means that the\\n\\\nRHQ Server must attempt to access the remoted stream\\n\\\nevery X milliseconds (where X is the value of this setting)\\n\\\nor that stream will no longer be available. Note that this\\n\\\ndoes not mean the RHQ Server must read or write the\\n\\\nentire stream in this amount of time, it only means\\n\\\nthe RHQ Server must make a request on the stream every\\n\\\nX milliseconds (be it to read or write one byte, see how many\\n\\\nbytes are available to be read, etc)."))
static final String SETUP_INSTRUCTION_STREAMIDLE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_PREF
static final String SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_DEFAULT
static final String SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_PROMPT
@I18NMessages(value=@I18NMessage(value="Client Authentication Mode"))
static final String SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_HELP
@I18NMessages(value=@I18NMessage(value="Client-auth mode determines if the agent should authenticate some or all\\n\\\nsenders of incoming messages sent to the agent. If authentication is to be\\n\\\nperformed, the agent must have a server-side truststore.\\n\\\nThis preference value must be one of the following: none, want, need"))
static final String SETUP_INSTRUCTION_SERVERCLIENTAUTHMODE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_PREF
static final String SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_DEFAULT
SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_PROMPT
@I18NMessages(value=@I18NMessage(value="Server Authentication Mode Enabled?"))
static final String SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_HELP
@I18NMessages(value=@I18NMessage(value="When server authentication mode is true, the agent will attempt to\\n\\\nauthenticate the RHQ Server everytime it sends a message to it. If\\n\\\nthis is true, the agent must have a client-side truststore."))
static final String SETUP_INSTRUCTION_CLIENTSERVERAUTHMODEENABLED_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_PREF
static final String SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_DEFAULT
static final String SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_PROMPT
@I18NMessages(value=@I18NMessage(value="Incoming Secure Socket Protocol"))
static final String SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_HELP
@I18NMessages(value=@I18NMessage(value="The secure protocol required when receiving messages from the RHQ Server."))
static final String SETUP_INSTRUCTION_SERVERSECUREPROTOCOL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREFILE_PREF
static final String SETUP_INSTRUCTION_SERVERKEYSTOREFILE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREFILE_DEFAULT
static final String SETUP_INSTRUCTION_SERVERKEYSTOREFILE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREFILE_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Keystore File"))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREFILE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREFILE_HELP
@I18NMessages(value=@I18NMessage(value="The agent server-side keystore file that contains a key that is sent to\\n\\\nthe RHQ Server when the server is sending a message to the agent.\\n\\\nThis keystore contains the key that identifies the agent and is\\n\\\nused if the RHQ Server has its \"server authentication mode\" enabled.\\n\\\nThis can be the same as the agent client-side keystore file."))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREFILE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_PREF
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_DEFAULT
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Keystore Algorithm"))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_HELP
@I18NMessages(value=@I18NMessage(value="The algorithm used to generate the server-side keystore key."))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALGORITHM_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTORETYPE_PREF
static final String SETUP_INSTRUCTION_SERVERKEYSTORETYPE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTORETYPE_DEFAULT
static final String SETUP_INSTRUCTION_SERVERKEYSTORETYPE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTORETYPE_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Keystore Type"))
static final String SETUP_INSTRUCTION_SERVERKEYSTORETYPE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTORETYPE_HELP
@I18NMessages(value=@I18NMessage(value="Identifies the server-side keystore file format implementation."))
static final String SETUP_INSTRUCTION_SERVERKEYSTORETYPE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_PREF
static final String SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_DEFAULT
static final String SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Keystore Password"))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_HELP
@I18NMessages(value=@I18NMessage(value="The password to access the server-side keystore."))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREPASSWORD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_PREF
static final String SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_DEFAULT
static final String SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Keystore Key Password"))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_HELP
@I18NMessages(value=@I18NMessage(value="The password to access the key in the server-side keystore."))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREKEYPASSWORD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_PREF
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_DEFAULT
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Keystore Key Alias"))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_HELP
@I18NMessages(value=@I18NMessage(value="The alias of the key in the server-side keystore used to identify the agent."))
static final String SETUP_INSTRUCTION_SERVERKEYSTOREALIAS_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_PREF
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_DEFAULT
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Truststore File"))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_HELP
@I18NMessages(value=@I18NMessage(value="The agent server-side truststore file contains keys of trusted\\n\\\nRHQ Servers that are allowed to send the agent incoming messages. This is\\n\\\nused if the agent\'s client-auth mode is set to something other than none.\\n\\\nThis can be the same as the agent client-side truststore file."))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREFILE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_PREF
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_DEFAULT
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Truststore Algorithm"))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_HELP
@I18NMessages(value=@I18NMessage(value="The algorithm used to generate the server-side truststore keys."))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREALGORITHM_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_PREF
static final String SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_DEFAULT
static final String SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Truststore Type"))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_HELP
@I18NMessages(value=@I18NMessage(value="Identifies the server-side truststore file format implementation."))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTORETYPE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_PREF
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_DEFAULT
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_PROMPT
@I18NMessages(value=@I18NMessage(value="Server-side Truststore Password"))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_HELP
@I18NMessages(value=@I18NMessage(value="The password used to access the server-side truststore."))
static final String SETUP_INSTRUCTION_SERVERTRUSTSTOREPASSWORD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_PREF
static final String SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_PROMPT
@I18NMessages(value=@I18NMessage(value="Outgoing Secure Socket Protocol"))
static final String SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_HELP
@I18NMessages(value=@I18NMessage(value="The secure protocol required when sending messages to the RHQ Server."))
static final String SETUP_INSTRUCTION_CLIENTSECUREPROTOCOL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_PREF
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Keystore File"))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_HELP
@I18NMessages(value=@I18NMessage(value="The agent client-side keystore file that contains a key that is sent to\\n\\\nthe RHQ Server when the agent sends a message to the server.\\n\\\nThis keystore contains the key that identifies the agent and is\\n\\\nused if the RHQ Server has its \"client authentication mode\" set.\\n\\\nThis can be the same as the agent server-side keystore file."))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREFILE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_PREF
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Keystore Algorithm"))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_HELP
@I18NMessages(value=@I18NMessage(value="The algorithm used to generate the client-side keystore key."))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALGORITHM_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_PREF
static final String SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Keystore Type"))
static final String SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_HELP
@I18NMessages(value=@I18NMessage(value="Identifies the client-side keystore file format implementation."))
static final String SETUP_INSTRUCTION_CLIENTKEYSTORETYPE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_PREF
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Keystore Password"))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_HELP
@I18NMessages(value=@I18NMessage(value="The password to access the client-side keystore."))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREPASSWORD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_PREF
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Keystore Key Password"))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_HELP
@I18NMessages(value=@I18NMessage(value="The password to access the key in the client-side keystore."))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREKEYPASSWORD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_PREF
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Keystore Key Alias"))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_HELP
@I18NMessages(value=@I18NMessage(value="The alias of the key in the client-side keystore used to identify the agent."))
static final String SETUP_INSTRUCTION_CLIENTKEYSTOREALIAS_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_PREF
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Truststore File"))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_HELP
@I18NMessages(value=@I18NMessage(value="The agent client-side truststore file contains keys of trusted\\n\\\nRHQ Servers to which the agent is allowed to send outgoing messages. This is\\n\\\nused if the agent\'s server authentication mode is enabled.\\n\\\nThis can be the same as the agent server-side truststore file."))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREFILE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_PREF
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Truststore Algorithm"))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_HELP
@I18NMessages(value=@I18NMessage(value="The algorithm used to generate the client-side truststore keys."))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREALGORITHM_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_PREF
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Truststore Type"))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_HELP
@I18NMessages(value=@I18NMessage(value="Identifies the client-side truststore file format implementation."))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTORETYPE_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_PREF
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_DEFAULT
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_PROMPT
@I18NMessages(value=@I18NMessage(value="Client-side Truststore Password"))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_HELP
@I18NMessages(value=@I18NMessage(value="The password used to access the client-side truststore."))
static final String SETUP_INSTRUCTION_CLIENTTRUSTSTOREPASSWORD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSDIR_PREF
static final String SETUP_INSTRUCTION_PLUGINSDIR_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSDIR_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSDIR_DEFAULT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSDIR_PROMPT
@I18NMessages(value=@I18NMessage(value="Plugins Directory"))
static final String SETUP_INSTRUCTION_PLUGINSDIR_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSDIR_HELP
@I18NMessages(value=@I18NMessage(value="The directory location where the plugins can be found."))
static final String SETUP_INSTRUCTION_PLUGINSDIR_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_PREF
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_DEFAULT
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_PROMPT
@I18NMessages(value=@I18NMessage(value="Server Discovery Scan Period"))
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds that defines how often a server discovery\\n\\\nscan is performed. A server discovery looks for new servers\\n\\\nthat can be imported into inventory."))
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYPERIOD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_PREF
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_DEFAULT
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Server Discovery Scan Initial Delay"))
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds before the initial server discovery scan is performed."))
static final String SETUP_INSTRUCTION_PLUGINSSERVERDISCOVERYINITIALDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_PREF
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_DEFAULT
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_PROMPT
@I18NMessages(value=@I18NMessage(value="Service Discovery Scan Period"))
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds that defines how often a service discovery scan is\\n\\\nperformed. A service discovery scan looks for resources that were\\n\\\nadded or removed from existing platform and server resources."))
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYPERIOD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_PREF
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_DEFAULT
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Service Discovery Scan Initial Delay"))
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds before the initial service discovery scan is performed."))
static final String SETUP_INSTRUCTION_PLUGINSSERVICEDISCOVERYINITIALDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_PREF
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_DEFAULT
SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_PROMPT
@I18NMessages(value=@I18NMessage(value="Availability Scan Period"))
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds that defines how often an availability scan is\\n\\\nperformed. An availability scan looks to determine what resources\\n\\\nare up and running and what resources have gone down."))
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANPERIOD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_PREF
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_DEFAULT
SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Availability Scan Initial Delay"))
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds before the initial availability scan is performed."))
static final String SETUP_INSTRUCTION_PLUGINSAVAILSCANINITIALDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_PREF
static final String SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_DEFAULT
SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Measurement Collection Initial Delay"))
static final String SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds before the initial measurement collection is performed."))
static final String SETUP_INSTRUCTION_PLUGINSMEASUREMENTCOLLINITIALDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_PREF
static final String SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_DEFAULT
static final String SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_DEFAULT
SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_PROMPT
@I18NMessages(value=@I18NMessage(value="Register With RHQ Server at Startup"))
static final String SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_HELP
@I18NMessages(value=@I18NMessage(value="If true, the agent will automatically attempt to register\\n\\\nitself with the RHQ Server when the agent starts up.\\n\\\nIf false, you must ensure the agent is either already registered\\n\\\nor will be manually registered (see the register prompt command)."))
static final String SETUP_INSTRUCTION_REGISTERWITHSERVERATSTARTUP_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_PREF
static final String SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_DEFAULT
static final String SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_DEFAULT
SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_PROMPT
@I18NMessages(value=@I18NMessage(value="Wait Time for RHQ Server at Startup"))
static final String SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_HELP
@I18NMessages(value=@I18NMessage(value="This defines how many milliseconds the agent should wait at\\n\\\nstartup for the RHQ Server to be detected. If the RHQ Server\\n\\\nhas not started up in the given amount of time, the agent will\\n\\\ncontinue initializing and expect the server to come up later.\\n\\\nIf this is 0, the agent will not wait at all."))
static final String SETUP_INSTRUCTION_WAITFORSERVERATSTARTUPMSECS_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_PREF
static final String SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_DEFAULT
static final String SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_DEFAULT
SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_PROMPT
@I18NMessages(value=@I18NMessage(value="Primary Server Switchover Check Interval:"))
static final String SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_HELP
@I18NMessages(value=@I18NMessage(value="The agent will periodically check to ensure that the server\\n\\\nit is connected to is its primary server (as opposed to one\\n\\\nof its failover servers). This preference defines how many\\n\\\nmilliseconds the agent should wait in between these checks.\\n\\\nIf 0, this check is never performed.\\n\\\n"))
static final String SETUP_INSTRUCTION_PRIMARYSERVERSWITCHOVERCHECKINTERVAL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_DISABLENATIVESYSTEM_PREF
static final String SETUP_INSTRUCTION_DISABLENATIVESYSTEM_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_DISABLENATIVESYSTEM_DEFAULT
static final String SETUP_INSTRUCTION_DISABLENATIVESYSTEM_DEFAULT
SETUP_INSTRUCTION_DISABLENATIVESYSTEM_PROMPT
@I18NMessages(value=@I18NMessage(value="Disable Native System"))
static final String SETUP_INSTRUCTION_DISABLENATIVESYSTEM_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_DISABLENATIVESYSTEM_HELP
@I18NMessages(value=@I18NMessage(value="This will allow you to tell the agent to disable the native system,\\n\\\nthus turning off the usage of the native libraries (if they are\\n\\\navailable on the agent platform). In fact, disabling the native system\\n\\\nwill ensure that the native JNI libraries are not even loaded into the\\n\\\nagent\'s Java VM. You normally do not want to disable the native system\\n\\\nunless you have a good reason to do so. Disabling the native system will\\n\\\nturn off the ability of the plugins to perform auto-discovery using\\n\\\nprocess table scans and will not allow the plugins to obtain\\n\\\nany information from the low-level operating system resources."))
static final String SETUP_INSTRUCTION_DISABLENATIVESYSTEM_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_PREF
static final String SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_DEFAULT
static final String SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_DEFAULT
SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_PROMPT
@I18NMessages(value=@I18NMessage(value="Update Plugins at Startup"))
static final String SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_HELP
@I18NMessages(value=@I18NMessage(value="If true, the agent will attempt to update its current set of plugins to their\\n\\\nlatest versions at startup. If false, the agent will not automatically update\\n\\\nthe plugins; the agent will use its current plugins."))
static final String SETUP_INSTRUCTION_UPDATEPLUGINSATSTARTUP_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEENABLED_PREF
static final String SETUP_INSTRUCTION_AGENTUPDATEENABLED_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEENABLED_DEFAULT
static final String SETUP_INSTRUCTION_AGENTUPDATEENABLED_DEFAULT
SETUP_INSTRUCTION_AGENTUPDATEENABLED_PROMPT
@I18NMessages(value=@I18NMessage(value="Enable Agent Updates"))
static final String SETUP_INSTRUCTION_AGENTUPDATEENABLED_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEENABLED_HELP
@I18NMessages(value=@I18NMessage(value="If true, the agent will be allowed to apply agent updates to itself.\\n\\\nIf false, the agent will never apply updates; therefore any agent updates\\n\\\nmust be done manually."))
static final String SETUP_INSTRUCTION_AGENTUPDATEENABLED_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_PREF
static final String SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_DEFAULT
static final String SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_DEFAULT
SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Update Version URL"))
static final String SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_HELP
@I18NMessages(value=@I18NMessage(value="If this is defined, it will be the URL the agent uses when it\\n\\\nneeds to retrieve information about the latest available\\n\\\nagent update binary. If this is not defined (i.e. left as \'null\'),\\n\\\nthe default will be a URL to the server the agent is currently\\n\\\nconnected to at the time the version request is initiated. If you have\\n\\\nthis set but wish to revert back to the default behavior,\\n\\\nenter !* at the prompt."))
static final String SETUP_INSTRUCTION_AGENTUPDATEVERSIONURL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_PREF
static final String SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_DEFAULT
static final String SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_DEFAULT
SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Update Download URL"))
static final String SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_HELP
@I18NMessages(value=@I18NMessage(value="If this is defined, it will be the URL the agent uses when it\\n\\\nneeds to download the latest available agent update binary.\\n\\\nIf this is not defined (i.e. left as \'null\'), the default will be\\n\\\na URL to the server the agent is currently connected to at the time the\\n\\\ndownload is initiated. If you have this set but wish to revert back\\n\\\nto the default behavior, enter !* at the prompt."))
static final String SETUP_INSTRUCTION_AGENTUPDATEDOWNLOADURL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTNAME_PREF
static final String SETUP_INSTRUCTION_AGENTNAME_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTNAME_PROMPT
@I18NMessages(value=@I18NMessage(value="Agent Name"))
static final String SETUP_INSTRUCTION_AGENTNAME_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_AGENTNAME_HELP
@I18NMessages(value=@I18NMessage(value="The name that this agent is to be known as. This must be unique across\\n\\\nall agents. The default is the fully qualified domain name of the host\\n\\\nthat this agent is running on. However, you can name it anything you\\n\\\nwant, as long as it is unique among all other agents in the system."))
static final String SETUP_INSTRUCTION_AGENTNAME_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_PREF
static final String SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_DEFAULT
static final String SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_DEFAULT
SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_PROMPT
@I18NMessages(value=@I18NMessage(value="Measurement Collection Thread Pool Size"))
static final String SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_HELP
@I18NMessages(value=@I18NMessage(value="This defines the number of threads within the plugin container\'s measurement\\n\\\ncollection thread pool. The higher the number, the more measurements that\\n\\\ncan be collected concurrently."))
static final String SETUP_INSTRUCTION_PCMEASUREMENTTHREADCOUNT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_PREF
static final String SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_DEFAULT
static final String SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_DEFAULT
SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_PROMPT
@I18NMessages(value=@I18NMessage(value="Operation Invoker Thread Pool Size"))
static final String SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_HELP
@I18NMessages(value=@I18NMessage(value="This defines the number of threads within the plugin container\'s operation\\n\\\ninvoker thread pool. The higher the number, the more operations that\\n\\\ncan be concurrently invoked."))
static final String SETUP_INSTRUCTION_PCOPERATIONTHREADCOUNT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_PREF
static final String SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_DEFAULT
static final String SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_DEFAULT
SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_PROMPT
@I18NMessages(value=@I18NMessage(value="Operation Invocation Timeout"))
static final String SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_HELP
@I18NMessages(value=@I18NMessage(value="This is the default timeout used for operation invocations. When a plugin\\n\\\ninvokes an operation on a managed resource, and that invocation does not\\n\\\nfinish with this amount of seconds, the invocation will be aborted.\\n\\\nNote that this is only a default; a plugin may actually override this value\\n\\\nby defining its own timeouts within its plugin descriptor."))
static final String SETUP_INSTRUCTION_PCOPINVOCATIONTIMEOUT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_PREF
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_DEFAULT
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_PROMPT
@I18NMessages(value=@I18NMessage(value="Content Discovery Thread Pool Size"))
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_HELP
@I18NMessages(value=@I18NMessage(value="This defines the number of threads within the plugin container\'s content\\n\\\ndiscovery thread pool. The higher the number, the more content discoveries\\n\\\nthat can be collected concurrently."))
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYTHREADCOUNT_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_PREF
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_DEFAULT
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_PROMPT
@I18NMessages(value=@I18NMessage(value="Content Discovery Period"))
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds that defines how often content discoveries are run.\\n\\\nIf 0 or less, content discovery is disabled."))
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYPERIOD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_PREF
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_DEFAULT
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Content Discovery Initial Delay"))
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds before the initial content discovery is performed."))
static final String SETUP_INSTRUCTION_PLUGINSCONTENTDISCOVERYINITIALDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_PREF
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_DEFAULT
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_PROMPT
@I18NMessages(value=@I18NMessage(value="Configuration Discovery Period"))
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds that defines how often configuration discoveries are run.\\n\\\nIf 0 or less, configuration discovery is disabled."))
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYPERIOD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_PREF
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_DEFAULT
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Configuration Discovery Initial Delay"))
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_HELP
@I18NMessages(value=@I18NMessage(value="The time in seconds before the initial configuration discovery is performed."))
static final String SETUP_INSTRUCTION_PLUGINSCONFIGURATIONDISCOVERYINITIALDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_PREF
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_DEFAULT
SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_PROMPT
@I18NMessages(value=@I18NMessage(value="Event Sender Period"))
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_HELP
@I18NMessages(value=@I18NMessage(value="Defines how often event reports get sent to the server (in seconds)."))
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERPERIOD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_PREF
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_DEFAULT
SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_PROMPT
@I18NMessages(value=@I18NMessage(value="Event Sender Initial Delay"))
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_HELP
@I18NMessages(value=@I18NMessage(value="The delay, in seconds, before the first event report gets sent to the server."))
static final String SETUP_INSTRUCTION_PLUGINSEVENTSENDERINITIALDELAY_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_PREF
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_DEFAULT
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_PROMPT
@I18NMessages(value=@I18NMessage(value="Event Report Max Per Source"))
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_HELP
@I18NMessages(value=@I18NMessage(value="The maximum number of events for any given event source that can be placed\\n\\\nin a single event report that is sent up to the server. If this number is\\n\\\nlarger than the max-total setting, then this setting is ignored."))
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXPERSRC_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_PREF
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_DEFAULT
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_DEFAULT
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_PROMPT
@I18NMessages(value=@I18NMessage(value="Event Report Max Total"))
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_HELP
@I18NMessages(value=@I18NMessage(value="The total maximum number of events that can be placed in a single event\\n\\\nreport that is sent up to the server."))
static final String SETUP_INSTRUCTION_PLUGINSEVENTREPORTMAXTOTAL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_PREF
static final String SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_DEFAULT
static final String SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_DEFAULT
SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_PROMPT
@I18NMessages(value=@I18NMessage(value="VM Health Check Interval"))
static final String SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_HELP
@I18NMessages(value=@I18NMessage(value="The time in milliseconds in between checking the VM\'s health."))
static final String SETUP_INSTRUCTION_VMHEALTHCHECKINTERVAL_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_PREF
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_DEFAULT
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_DEFAULT
SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_PROMPT
@I18NMessages(value=@I18NMessage(value="VM Health Check Low Heap Mem Threshold"))
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_HELP
@I18NMessages(value=@I18NMessage(value="The threshold percentage that must be crossed if the agent\'s VM health check\\n\\\nis to consider the JVM with critically low memory. This value is a percentage\\n\\\nof used heap memory out of the maximum heap size."))
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWHEAPMEMTHRESHOLD_HELP
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_PREF
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_PREF
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_DEFAULT
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_DEFAULT
SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_PROMPT
@I18NMessages(value=@I18NMessage(value="VM Health Check Low Non-Heap Mem Threshold"))
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_PROMPT
- See Also:
- Constant Field Values
SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_HELP
@I18NMessages(value=@I18NMessage(value="The threshold percentage that must be crossed if the agent\'s VM health check\\n\\\nis to consider the JVM with critically low memory. This value is a percentage\\n\\\nof used nonheap memory out of the maximum nonheap size."))
static final String SETUP_INSTRUCTION_VMHEALTHCHECKLOWNONHEAPMEMTHRESHOLD_HELP
- See Also:
- Constant Field Values
Copyright © 2008-2011 Red Hat, Inc.. All Rights Reserved.