org.infinispan.commons.marshall

Class AbstractDelegatingMarshaller

java.lang.Object

org.infinispan.commons.marshall.AbstractDelegatingMarshaller

All Implemented Interfaces:

Marshaller, StreamingMarshaller

public abstract class AbstractDelegatingMarshaller
extends java.lang.Object
implements StreamingMarshaller

With the introduction of global and cache marshallers, there's a need to separate marshallers but still rely on the same marshalling backend as previously. So, this class acts as a delegator for the new marshallers.

Since:

5.0

Field Summary

Fields

Modifier and Type	Field and Description
protected StreamingMarshaller	marshaller

Constructor Summary

Constructors

Constructor and Description
AbstractDelegatingMarshaller()

Method Summary

Modifier and Type	Method and Description
void	finishObjectInput(java.io.ObjectInput oi) Finish using the given ObjectInput.
void	finishObjectOutput(java.io.ObjectOutput oo) Finish using the given ObjectOutput.
BufferSizePredictor	getBufferSizePredictor(java.lang.Object o) Returns a marshalled payload size predictor for a particular type.
boolean	isMarshallable(java.lang.Object o) A method that checks whether the given object is marshallable as per the rules of this marshaller.
java.lang.Object	objectFromByteBuffer(byte[] buf) Unmarshalls an object from a byte array.
java.lang.Object	objectFromByteBuffer(byte[] buf, int offset, int length) Unmarshalls an object from a specific portion of a byte array.
java.lang.Object	objectFromInputStream(java.io.InputStream is) Unmarshall an object from an InputStream
java.lang.Object	objectFromObjectStream(java.io.ObjectInput in) Unmarshalls an object from an ObjectInput
ByteBuffer	objectToBuffer(java.lang.Object o) A method that returns an instance of ByteBuffer, which allows direct access to the byte array with minimal array copying
byte[]	objectToByteBuffer(java.lang.Object obj) Marshalls an object to a byte array.
byte[]	objectToByteBuffer(java.lang.Object obj, int estimatedSize) Marshalls an object to a byte array.
void	objectToObjectStream(java.lang.Object obj, java.io.ObjectOutput out) Marshalls an object to a given ObjectOutput
java.io.ObjectInput	startObjectInput(java.io.InputStream is, boolean isReentrant) Create and open a new ObjectInput for the given input stream.
java.io.ObjectOutput	startObjectOutput(java.io.OutputStream os, boolean isReentrant, int estimatedSize) Create and open an ObjectOutput instance for the given output stream.
void	stop() Stop the marshaller.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface org.infinispan.commons.marshall.StreamingMarshaller

start

Methods inherited from interface org.infinispan.commons.marshall.Marshaller

mediaType

Field Detail

marshaller

protected StreamingMarshaller marshaller

Constructor Detail

AbstractDelegatingMarshaller

public AbstractDelegatingMarshaller()

Method Detail

stop

public void stop()

Description copied from interface: StreamingMarshaller

Stop the marshaller. Implementations of this method should clear up any cached data, or close any resources while marshalling/unmarshalling that have not been already closed.

Specified by:

stop in interface StreamingMarshaller

startObjectOutput

public java.io.ObjectOutput startObjectOutput(java.io.OutputStream os,
                                              boolean isReentrant,
                                              int estimatedSize)
                                       throws java.io.IOException

Description copied from interface: StreamingMarshaller

Create and open an ObjectOutput instance for the given output stream. This method should be used for opening data outputs when multiple objectToObjectStream() calls will be made before the stream is closed by calling finishObjectOutput().

This method also takes a boolean that represents whether this particular call to startObjectOutput() is reentrant or not. A call to startObjectOutput() should be marked reentrant whenever a 2nd or more calls to this method are made without having called finishObjectOutput() first.

To potentially speed up calling startObjectOutput multiple times in a non-reentrant way, i.e. startObjectOutput/finishObjectOutput...startObjectOutput/finishObjectOutput...etc, which is is the most common case, the StreamingMarshaller implementation could potentially use some mechanisms to speed up this startObjectOutput call.

On the other hand, when a call is reentrant, i.e. startObjectOutput/startObjectOutput(reentrant)...finishObjectOutput/finishObjectOutput, the StreamingMarshaller implementation might treat it differently. An example of reentrancy would be marshalling of MarshalledValue. When sending or storing a MarshalledValue, a call to startObjectOutput() would occur so that the stream is open and following, a 2nd call could occur so that MarshalledValue's raw byte array version is calculated and sent across. This enables storing as binary on the receiver side which is performance gain. The StreamingMarshaller implementation could decide that it needs a separate ObjectOutput or similar for the 2nd call since it's aim is only to get the raw byte array version and the close finish with it.

Specified by:

startObjectOutput in interface StreamingMarshaller

Parameters:

os - output stream

isReentrant - whether the call is reentrant or not.

estimatedSize - estimated size in bytes of the output. Only meant as a possible performance optimization.

Returns:

ObjectOutput to write to

Throws:

java.io.IOException

finishObjectOutput

public void finishObjectOutput(java.io.ObjectOutput oo)

Description copied from interface: StreamingMarshaller

Finish using the given ObjectOutput. After opening a ObjectOutput and calling objectToObjectStream() multiple times, use this method to flush the data and close if necessary

Specified by:

finishObjectOutput in interface StreamingMarshaller

Parameters:

oo - data output that finished using

objectToObjectStream

public void objectToObjectStream(java.lang.Object obj,
                                 java.io.ObjectOutput out)
                          throws java.io.IOException

Description copied from interface: StreamingMarshaller

Marshalls an object to a given ObjectOutput

Specified by:

objectToObjectStream in interface StreamingMarshaller

Parameters:

obj - object to marshall

out - stream to marshall to

Throws:

java.io.IOException

startObjectInput

public java.io.ObjectInput startObjectInput(java.io.InputStream is,
                                            boolean isReentrant)
                                     throws java.io.IOException

Description copied from interface: StreamingMarshaller

Create and open a new ObjectInput for the given input stream. This method should be used for opening data inputs when multiple objectFromObjectStream() calls will be made before the stream is closed.

This method also takes a boolean that represents whether this particular call to startObjectInput() is reentrant or not. A call to startObjectInput() should be marked reentrant whenever a 2nd or more calls to this method are made without having called finishObjectInput() first.

To potentially speed up calling startObjectInput multiple times in a non-reentrant way, i.e. startObjectInput/finishObjectInput...startObjectInput/finishObjectInput...etc, which is is the most common case, the StreamingMarshaller implementation could potentially use some mechanisms to speed up this startObjectInput call.

Specified by:

startObjectInput in interface StreamingMarshaller

Parameters:

is - input stream

isReentrant - whether the call is reentrant or not.

Returns:

ObjectInput to read from

Throws:

java.io.IOException

finishObjectInput

public void finishObjectInput(java.io.ObjectInput oi)

Description copied from interface: StreamingMarshaller

Finish using the given ObjectInput. After opening a ObjectInput and calling objectFromObjectStream() multiple times, use this method to flush the data and close if necessary

Specified by:

finishObjectInput in interface StreamingMarshaller

Parameters:

oi - data input that finished using

objectFromObjectStream

public java.lang.Object objectFromObjectStream(java.io.ObjectInput in)
                                        throws java.io.IOException,
                                               java.lang.ClassNotFoundException,
                                               java.lang.InterruptedException

Description copied from interface: StreamingMarshaller

Unmarshalls an object from an ObjectInput

Specified by:

objectFromObjectStream in interface StreamingMarshaller

Parameters:

in - stream to unmarshall from

Throws:

java.io.IOException - if unmarshalling cannot complete due to some I/O error

java.lang.ClassNotFoundException - if the class of the object trying to unmarshall is unknown

java.lang.InterruptedException - if the unmarshalling was interrupted. Clients should take this as a sign that the marshaller is no longer available, maybe due to shutdown, and so no more unmarshalling should be attempted.

objectFromInputStream

public java.lang.Object objectFromInputStream(java.io.InputStream is)
                                       throws java.io.IOException,
                                              java.lang.ClassNotFoundException

Description copied from interface: StreamingMarshaller

Unmarshall an object from an InputStream

Specified by:

objectFromInputStream in interface StreamingMarshaller

Parameters:

is - stream to unmarshall from

Returns:

the unmarshalled object instance

Throws:

java.io.IOException - if unmarshalling cannot complete due to some I/O error

java.lang.ClassNotFoundException - if the class of the object trying to unmarshall is unknown

objectToByteBuffer

public byte[] objectToByteBuffer(java.lang.Object obj,
                                 int estimatedSize)
                          throws java.io.IOException,
                                 java.lang.InterruptedException

Description copied from interface: Marshaller

Marshalls an object to a byte array. The estimatedSize parameter is a hint that can be passed in to allow for efficient sizing of the byte array before attempting to marshall the object. The more accurate this estimate is, the less likely byte[]s will need to be resized to hold the byte stream generated by marshalling the object.

Specified by:

objectToByteBuffer in interface Marshaller

Parameters:

obj - object to convert to a byte array. Must not be null.

estimatedSize - an estimate of how large the resulting byte array may be

Returns:

a byte array with the marshalled form of the object

Throws:

java.io.IOException - if marshalling cannot complete due to some I/O error

java.lang.InterruptedException - if the marshalling was interrupted. Clients should take this as a sign that the marshaller is no longer available, maybe due to shutdown, and so no more unmarshalling should be attempted.

objectToByteBuffer

public byte[] objectToByteBuffer(java.lang.Object obj)
                          throws java.io.IOException,
                                 java.lang.InterruptedException

Description copied from interface: Marshaller

Marshalls an object to a byte array.

Specified by:

objectToByteBuffer in interface Marshaller

Parameters:

obj - object to convert to a byte array. Must not be null.

Returns:

a byte array

Throws:

java.io.IOException - if marshalling cannot complete due to some I/O error

java.lang.InterruptedException - if the marshalling process was interrupted. Clients should take this as a sign that the marshaller is no longer available, maybe due to shutdown, and so no more marshalling should be attempted.

objectFromByteBuffer

public java.lang.Object objectFromByteBuffer(byte[] buf)
                                      throws java.io.IOException,
                                             java.lang.ClassNotFoundException

Description copied from interface: Marshaller

Unmarshalls an object from a byte array.

Specified by:

objectFromByteBuffer in interface Marshaller

Parameters:

buf - byte array containing the binary representation of an object. Must not be null.

Returns:

an object

Throws:

java.io.IOException - if unmarshalling cannot complete due to some I/O error

java.lang.ClassNotFoundException - if the class of the object trying to unmarshall is unknown

objectFromByteBuffer

public java.lang.Object objectFromByteBuffer(byte[] buf,
                                             int offset,
                                             int length)
                                      throws java.io.IOException,
                                             java.lang.ClassNotFoundException

Description copied from interface: Marshaller

Unmarshalls an object from a specific portion of a byte array.

Specified by:

objectFromByteBuffer in interface Marshaller

Parameters:

buf - byte array containing the binary representation of an object. Must not be null.

offset - point in buffer to start reading

length - number of bytes to consider

Returns:

an object

Throws:

java.io.IOException - if unmarshalling cannot complete due to some I/O error

java.lang.ClassNotFoundException - if the class of the object trying to unmarshall is unknown

objectToBuffer

public ByteBuffer objectToBuffer(java.lang.Object o)
                          throws java.io.IOException,
                                 java.lang.InterruptedException

Description copied from interface: Marshaller

A method that returns an instance of ByteBuffer, which allows direct access to the byte array with minimal array copying

Specified by:

objectToBuffer in interface Marshaller

Parameters:

o - object to marshall

Throws:

java.io.IOException - if marshalling cannot complete due to some I/O error

java.lang.InterruptedException - if the marshalling process was interrupted. Clients should take this as a sign that the marshaller is no longer available, maybe due to shutdown, and so no more marshalling should be attempted.

isMarshallable

public boolean isMarshallable(java.lang.Object o)
                       throws java.lang.Exception

Description copied from interface: Marshaller

A method that checks whether the given object is marshallable as per the rules of this marshaller.

Specified by:

isMarshallable in interface Marshaller

Parameters:

o - object to verify whether it's marshallable or not

Returns:

true if the object is marshallable, otherwise false

Throws:

java.lang.Exception - if while checking whether the object was serializable or not, an exception arose

getBufferSizePredictor

public BufferSizePredictor getBufferSizePredictor(java.lang.Object o)

Description copied from interface: Marshaller

Returns a marshalled payload size predictor for a particular type. Accurate prediction of a type's serialized payload size helps avoid unnecessary copying and speeds up application performance.

Specified by:

getBufferSizePredictor in interface Marshaller

Parameters:

o - Object for which serialized predictor will be returned

Returns:

an instance of BufferSizePredictor